Kreg 20V Ionic Drive impact driver gives you a compact 4.4-in length that fits into tight spaces where standard drivers are hard to position, so you can drive fasteners in cabinets, corners, and framed openings with less repositioning. The 1/4-in quick-connect hex chuck allows fast bit changes, helping you switch between driver bits efficiently during repetitive work. With 2,200 in-lbs of torque delivering high-powered performance, the tool handles tough driving tasks in dense materials without stalling. Three speed settings provide maximum versatility so you can match driver speed to the material and fastener size. Assist Mode prevents overdriving and stripping screws, which supports cleaner installs and reduces rework. Sturdy metal housing and premium metal gearing support long-lasting reliability under regular jobsite use. The tool is backed by a 3-year limited warranty, giving clear support coverage over an extended service window.
The Kreg 20V Ionic Drive 1/4-in compact impact driver pairs 2,200 in-lbs of torque with three speed settings to give you practical control over power. This combination lets you tailor driving force to the fastener and workpiece, from lighter tasks to tougher jobs. Assist Mode adds another layer of control by helping prevent overdriving and stripping screws, which is helpful when seating fasteners flush in finished materials. The quick-connect hex chuck keeps setup time low because you can change bits quickly between tasks. Its compact 4.4-in length supports setups in confined areas, so you can position the tool more directly on the fastener even when space is limited.
The Kreg 20V Ionic Drive 1/4-in compact impact driver, at 4.4-in length, is well-suited to cabinet interiors, close quarters in woodworking assemblies, and other tight areas where tool clearance is limited. In these situations, the shorter body allows more direct driver alignment on the screw head, which supports cleaner driving and better control. When working on tough jobs, the 2,200 in-lbs of torque delivers the high-powered performance needed to seat fasteners in dense materials. Three speed settings support varied applications on the same project, from careful work on finished fronts to faster driving through structural components. Assist Mode adds benefit wherever screw stripping is a concern, such as when working in softer materials or near finished surfaces. The quick-connect hex chuck helps maintain momentum on multi-step installations because bit changes happen rapidly between fastening tasks.
The three speed settings on this Kreg 20V compact impact driver allow you to repeat a chosen driving behavior across many fasteners, which helps maintain uniform results on runs of similar screws. When you select a lower speed, the driver provides more measured control, which is useful for precise seating in visible areas. Higher speeds used with the 2,200 in-lbs of torque emphasize productivity on more demanding fastening tasks. Assist Mode directly helps prevent overdriving and stripping screws, which protects both fasteners and surrounding material and supports repeatable depth from one screw to the next. The quick-connect hex chuck keeps each setup consistent, because bit engagement is simple and secure across repeated changes. Sturdy metal housing and premium metal gearing support consistent performance over time, so the driving feel and response remain familiar from project to project.
The Kreg 20V Ionic Drive 1/4-in compact impact driver is a power tool designed for driving fasteners, using its impact mechanism and torque to handle a range of woodworking and construction jobs.
The compact 4.4-in length allows the impact driver to reach fasteners in tight spaces, such as inside cabinets or near obstructions, improving access where longer tools are harder to position.
The 2,200 in-lbs of torque delivers high-powered performance, helping drive longer or larger screws into dense materials without frequent stalls, which supports efficient fastening on tougher jobs.
The three speed settings on this impact driver provide maximum versatility, allowing you to select slower or faster operation so driving behavior matches the specific material and fastener demands.
Assist Mode on this impact driver helps prevent overdriving and stripping screws, which supports cleaner installations, protects work surfaces, and reduces the likelihood of damaged fasteners during driving.
The sturdy metal housing and premium metal gearing are built for long-lasting reliability, so the impact driver maintains consistent operation during repeated use in demanding work environments.
The Kreg 20V Ionic Drive 1/4-in compact impact driver combines a 4.4-in length, 2,200 in-lbs of torque, and three speed settings to support tight-access and tough driving tasks on woodworking projects. Assist Mode adds control that helps prevent overdriving and stripping screws, which matters on visible or delicate work. The quick-connect hex chuck keeps bit changes fast across different fastening steps. With sturdy metal housing, premium metal gearing, and a 3-year limited warranty, this driver is structured for long-lasting reliability. Select this impact driver when you need compact access, high-powered driving, and straightforward control from a single cordless tool.
Sold In: 1 Kit