Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Amerock concealed hinge is built for face-frame cabinets where the door is set to a 1/2 inch overlay, with a self-close spring that draws the door shut on its own. It is sold as a pair.
A 1/2 inch overlay means the door covers only part of the cabinet side rather than nearly all of it. That geometry comes up most often where two doors meet on a shared center partition: each door needs to overlay by roughly half an inch so the pair lines up evenly with a consistent reveal between them. This hinge's half-crank arm is what produces that position. The 35mm cup bores into the back of the door, and the arm connects to a base plate mounted to the cabinet, ordered separately. The plate is Amerock-specific, so match it to this hinge when specifying.
The hinge body is steel with a nickel finish. The screw-on mounting is the most direct connection in the concealed hinge family: the hinge fastens to the face-frame stile with wood screws, no clip mechanism or system holes required. That makes it a clean option for face-frame work where the cabinet box may not have pre-drilled 5mm system holes. The self-close spring is integrated, so no separate add-on is needed to get the door closing on its own.
This hinge suits face-frame cabinets in kitchens, baths, laundry rooms, and built-ins where a partial overlay is specified and the priority is a door that closes by itself without a soft-close premium. It is practical for remodels and new builds alike, and selling as a pair makes it easy to quote one line item per door. For doors that need to close quietly without slamming, the soft-close version of this hinge is the better call. For a door that covers the full cabinet side rather than a partial overlay, an overlay hinge with a straight arm is the right choice instead.
No. Self-close uses a spring to pull the door shut over the final degrees of travel. It closes the door automatically but does not cushion the contact. For a damped, quiet close, choose a soft-close version of this hinge.
A base plate is required to complete the installation and is sold separately. The hinge arm mounts to the plate, which fastens to the cabinet. Use the matching Amerock plate for this hinge.
This listing covers one pair, which is the typical count for standard-height doors. For taller or heavier doors, check the manufacturer load guidance to confirm whether a third hinge is needed.
This hinge is designed for face-frame cabinets. The screw-on mount fastens to the stile of a face frame. For a frameless box, a frameless-specific plate and mount type is the correct fit.
Specify this hinge when the job calls for a 1/2 inch overlay on face-frame cabinets and a self-closing door, with a straightforward screw-on install and no extra mechanisms to add.