Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Amerock concealed long arm European hinge hangs full overlay doors on face-frame cabinets, with a self-close spring and a screw-on mount, and is sold as a pair.
Full overlay is the door position where a single door covers almost the whole cabinet side, leaving only a narrow gap at the reveal. This hinge sets that geometry with a straight arm and a 35mm cup bored into the back of the door. The arm connects to a base plate mounted on the cabinet, which is sold separately. On a face-frame cabinet, that plate fastens to the stile, bringing the door out to its full overlay position. The self-close spring takes over once the door swings within a few degrees of closed, drawing it shut without a push.
The hinge is steel with a nickel finish, a combination that holds up through daily use without corroding or dulling under normal indoor conditions. The screw-on connection between the arm and plate gives a mechanically firm hold that does not rely on a clip or snap mechanism, which suits builders who prefer a fixed, fastened joint over a tool-free release. A screwdriver is needed for installation and for any adjustment.
Face-frame cabinets are the traditional American construction, with stiles and rails on the front of the box, and this hinge is specified for exactly that application. It suits remodelers replacing hinges on existing face-frame boxes, cabinet shops running traditional face-frame lines, and contractors who want a dependable concealed hinge at a working price. The pair format matches the standard two-hinge count for most door heights, though taller or heavier doors may need a third hinge based on the manufacturer load table. For a cushioned, damped close rather than a spring pull, this same series offers a soft-close version.
Self-close uses a spring to pull the door shut over the last few degrees. Soft-close uses a damper to slow the door so it does not slam. This hinge is self-close: it draws the door shut but does not cushion the final contact. If a quiet, damped close is what the project needs, look for the soft-close version in this series.
No. The hinge arm connects to a base plate that mounts to the cabinet stile, and that plate is sold separately. Use an Amerock plate matched to this hinge series and your cabinet construction.
This hinge opens to 105 degrees. That is the designed opening for this model, providing solid everyday access on face-frame doors. It is a sourced spec for this SKU, not a shortcoming.
One pair covers a standard door height with two hinges. Taller or heavier doors may need a third hinge. Check the manufacturer load table for the exact count based on your door's height and weight.
Specify this pair when the job calls for full overlay face-frame doors that close on their own, with a solid screw-on connection and a finish that blends with the rest of the hardware run.