Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Amerock concealed Euro hinge hangs full overlay doors on frameless cabinets, with a built-in self-close spring that draws the door shut automatically once it swings within a few degrees of closed.
Full overlay frameless cabinetry is the everyday workhorse of production shops and kitchen remodels, and the self-close spring is what keeps those doors behaving consistently. The hinge's straight arm sets the door at a full overlay, so one panel covers the cabinet side with just a narrow strip of the box visible at the edge. The 35mm cup bores into the back of the door face, and the arm connects to a base plate mounted on the cabinet interior. That base plate is a separate purchase, matched to your cabinet construction and the overlay position you need. Once everything is set, the spring takes over: release the door a few degrees out and it pulls itself the rest of the way closed.
The hinge body is steel with a nickel finish. Screw-on mounting means the arm fastens to the plate with standard wood screws rather than a tool-free clip, which gives a solid mechanical connection that does not depend on pre-drilled system holes in the cabinet side. That makes it a practical fit for retrofit work and custom shop builds where the 32mm hole grid is not always present. Three-way adjustment is available through the cam screws on the arm, so doors can be dialed into a consistent reveal after the cabinet is set.
This hinge is built for frameless cabinets and suits any installer or shop running standard full overlay doors who wants a dependable self-close without the added cost of a damped mechanism. It works especially well on replacement jobs where the existing bore matches the 35mm cup and 45mm pattern, and on new builds where screw-on mounting is preferred over tool-free plate systems. For doors thicker than about 22mm, a thick-door hinge is the better match. If the project calls for a cushioned, quiet close rather than a spring pull, the soft-close version of this hinge is the one to specify instead.
No. This hinge uses a self-close spring that pulls the door shut automatically. It does not cushion or slow the close. For a damped, quiet close, choose the soft-close version of this hinge.
No. The hinge arm connects to a base plate that mounts inside the cabinet, and that plate is sold separately. Choose a plate that matches your cabinet construction and the overlay you need.
This pair covers one standard door. As a general guide, doors up to about 40 inches tall use two hinges and taller doors use three or more. Consult the manufacturer load table for your exact door height and weight.
No. Screw-on mounting uses standard wood screws through the plate into the cabinet side, so pre-drilled system holes are not required. That makes it a flexible option for custom builds and retrofits.
Specify this hinge when the job calls for full overlay frameless doors that close on their own, with a straightforward screw-on install that works on any cabinet box.