Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Amerock soft-close concealed hinge hangs full overlay doors on frameless cabinets, with a nickel-finished steel body and integrated soft-close that settles each door quietly without slamming. Sold as a pair.
Full overlay is the most common door position in frameless cabinetry: each door covers almost the full cabinet side so very little of the box shows. This hinge carries the straight-arm geometry that produces that look. The 35mm cup bores into the back of the door at the standard depth, and the arm connects to a base plate mounted to the cabinet side. The base plate is sold separately and must be matched to this hinge's brand and screw pattern. With the arm screwed to the plate and the cup seated in the door, three-way cam adjustment brings every door to an even reveal before the job is done.
The hinge body is plated steel in a nickel finish. Nickel reads as a warm, mid-tone metallic that sits comfortably alongside brushed nickel pulls, satin nickel knobs, and similar hardware families. The soft-close mechanism is built into the hinge rather than added on, so the damping is consistent from the first install and there is no separate adapter to source or lose track of. For a run of frameless cabinets where the hardware finish carries through to the hinges, the nickel finish ties the visible parts of the install together.
This hinge fits standard frameless doors in the 16 to 22mm thickness range. It suits cabinetmakers working on frameless kitchen or bath projects where the hinge finish is visible from certain angles and needs to coordinate with the rest of the hardware spec. It also works well for remodel contractors replacing existing concealed hinges on frameless boxes when the project calls for soft-close and a nickel finish match. For doors thicker than 22mm, a thick-door hinge is the right selection. This hinge mounts to its own brand-specific base plate, so bring the Amerock plate to the job.
No. The hinge body and arm are included as a pair, but the base plate that mounts to the cabinet side is a separate purchase. Use an Amerock plate matched to this hinge series.
A self-close hinge uses a spring to pull the door shut. This hinge has soft-close, which uses a built-in damper to slow the door over its last few degrees so it settles quietly rather than snapping shut.
This hinge is rated for frameless cabinets. For a face-frame box, a face-frame hinge or a face-frame adapter plate is the correct approach.
As a general guide, doors up to about 40 inches tall use two hinges and taller doors use three or more. Check the manufacturer load table for your exact door height, width, and weight.
Specify this hinge when the project calls for full overlay frameless doors, a soft-close feel, and a nickel finish that carries through from hinges to hardware.