Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek porcelain cabinet knob gives you a finished, coordinated pull point for cabinet and furniture doors. This knob uses an ebony porcelain design, so it delivers a dark, solid-colored grip that visually anchors lighter door and drawer fronts on built-ins or furniture.
The knob has a 1-3/4 inch diameter, so it offers a full, comfortable hand contact area that works well on both narrow and wider cabinet fronts. That 1-3/4 inch size also scales correctly for many kitchen, bath, and shop cabinet layouts where a more substantial knob improves day-to-day handling.
This piece is part of the Schaub Porcelain Knob Series in a pewter finish, giving the base a muted metal tone that pairs with the ebony porcelain for a two-material look. The Emtek brand and specific part number 86033US15A identify it as a decorative cabinet knob inside the Emtek cabinet hardware line.
This porcelain cabinet knob is specified at a 1-3/4 inch diameter, also noted as 44 mm, so installers can plan hole locations and spacing with that face size in mind across doors and drawers. That defined diameter helps maintain uniform visual margins when mixing with other knob or pull styles.
The knob is identified in the Schaub Porcelain Knob Series with a pewter description, so it sits in a coordinated group of porcelain knobs that share a similar design language. Its classification as a cabinet knob within decorative hardware and moldings keeps it targeted toward cabinet doors and drawers rather than broader hardware roles.
This Emtek porcelain cabinet knob in ebony is designed as a knob for cabinets and similar doors, giving a defined grab point wherever a small round pull is needed. The dark ebony porcelain surface reads as a solid accent on face frames and door fronts.
With its 1-3/4 inch diameter, the knob suits typical cabinet doors and many drawer fronts where a single knob is preferred. That size helps the knob feel substantial on full-height doors while still remaining manageable on smaller upper cabinets or furniture doors.
Placement in the decorative hardware and moldings, knobs category aligns it with common kitchen, bath, and woodworking cabinet projects handled by installers and shops. The Schaub porcelain knob series description positions this piece so it can visually line up with other porcelain knobs that share similar styling on multi-room jobs.
The pewter reference in the web description signals that the knob coordinates with pewter-tone hardware selections in a project, letting this knob sit alongside other pewter-colored hinges or pulls. Together with the ebony porcelain, this produces a two-tone effect that can tie casework, doors, and trim hardware into a single visual group.
The Emtek porcelain cabinet knob is defined by manufacturer part number 86033US15A, which gives installers and shops a concise way to match existing hardware during future cabinet additions or service work. That clear identifier reduces guesswork when a project calls for replacement knobs to mirror an earlier phase.
The 1-3/4 inch, or 44 mm, diameter stays constant across orders, so layout dimensions set on the first installation remain valid for later runs of cabinetry. This consistency supports repeat drilling patterns and jigs when updating or expanding a line of cabinets.
Categorization under Emtek knobs within decorative hardware and moldings ties this knob back to a defined hardware family, which can aid in hardware schedules and documentation on larger jobs. The ebony porcelain description stays stable across references, allowing spec sheets and cabinet drawings to reference a specific visual appearance.
The tie-in to the Schaub porcelain knob series, with a pewter note, also helps designers and installers track the combination of porcelain surface and pewter-related details when balancing other metal finishes on a project. Using a clearly labeled series streamlines coordination between design intent, purchasing, and on-site cabinet installation.
The Emtek porcelain cabinet knob has a 1-3/4 inch, or 44 mm, diameter, giving a defined face size that supports consistent spacing and layout on cabinet doors and drawer fronts.
The knob uses an ebony porcelain design paired with a pewter description, creating a dark porcelain pull point that aligns with pewter-toned decorative cabinet hardware selections.
The 86033US15A manufacturer part number identifies this exact Emtek porcelain cabinet knob for ordering, documentation, and matching existing installations during later cabinet work.
The knob sits in the decorative hardware and moldings knob category, so it is intended for use on cabinet doors, drawers, and similar casework in woodworking projects.
This knob is identified in the Schaub Porcelain Knob Series, placing it within a grouped set of porcelain knobs that share related styling and application on cabinets.
The 44 mm diameter defines the knob footprint, helping installers set drilling locations and maintain balanced visual margins on doors and drawers across a cabinet run.
The Emtek porcelain cabinet knob in ebony with a pewter description combines a 1-3/4 inch, 44 mm diameter with a clearly documented 86033US15A part number. That combination supports repeatable cabinet layouts, straightforward reorders, and consistent visual results across your decorative cabinet hardware work.