Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Georgetown glass knob gives you a 1-3/4 inch diameter glass knob that serves as a decorative pull point on cabinet or door fronts, so you get a clear, defined grip point where users naturally reach to open or close surfaces. The Georgetown glass construction provides a distinct material change from wood or laminate faces, which helps installers visually mark access points across doors or drawers in a run. The glass and satin nickel combination in this Emtek knob creates a contrast between knob and surface, helping separate hardware from face material when laying out hardware lines on cabinetry. Using the Emtek Georgetown knob as a repeat part number in a project standardizes this pull type across rooms, simplifying ordering, layout decisions, and long-term part replacement. The Emtek brand identity on this decorative knob gives shops and installers a consistent line reference when matching other Emtek knobs in the same project.
The 1-3/4 inch diameter of the Emtek Georgetown glass knob defines how far the knob will extend across the face where it is mounted, helping layout technicians decide centerline positions so adjacent doors and drawers open without hand interference. The glass construction described for this knob signals that installers are working with a non-metallic gripping surface, which can influence how they align it with metal hinges or latches for a balanced hardware appearance. The satin nickel reference on this Emtek knob ties it visually to satin nickel components elsewhere in the assembly, helping project leads coordinate hinge and knob selections by finish family in the hardware schedule. With a clearly stated Emtek brand and a specific part number, installers can route this knob into project documentation so field teams pull the correct part for each door or drawer location.
The Emtek Georgetown glass knob, identified in the SAP description as a Georgetown glass knob and in the web description as a Georgetown crystal knob, positions this part as a visible decorative element on cabinet or similar fronts where a single-point pull is needed. The 1-3/4 inch diameter dimension means this knob suits applications where a modestly sized round grip can stand off cleanly from the door or drawer face, rather than a small finger pull or long handle. Being categorized under Decorative Hardware and Moldings and further under Knobs, Emtek confirms its role as a decorative knob selection rather than a concealed component, so it becomes part of the visual design grid across a bank of doors. The glass and satin nickel combination noted in the product name and SAP description lets designers match this knob to other satin nickel hardware, aligning it with a satin nickel-centric palette in kitchens, baths, or built-ins. By specifying the manufacturer part number 86400US15, project specifiers create a clear link between drawings, cut sheets, and field installation, so the same Georgetown glass knob style appears wherever that callout is used.
The 1-3/4 inch diameter on the Emtek Georgetown glass knob gives installers a reliable measurement when setting drilling templates, so they can set edge distances and spacing around the knob knowing its final diameter in advance. Because the knob is identified as glass in both the SAP and product name, layout teams know they are dealing with a transparent or translucent element, which affects how backer materials or finishes show through behind the knob and can guide color and material choices nearby. The satin nickel reference in the product name and SAP description provides a fixed finish description for the non-glass portion, which helps reduce variation when multiple crew members are pulling hardware for different rooms and need a consistent satin nickel note. The Emtek brand and the 86400US15 part number together give shops a stable identifier for reorder and service work, so future replacements or additions maintain the same Georgetown glass knob style as the original install. With the web description tying this part to the Georgetown crystal knob naming, documentation can reference either term while still landing on the same Emtek decorative knob, simplifying communication between design, purchasing, and the field.
The Emtek Georgetown glass knob has a 1-3/4 inch diameter, which helps installers plan drilling locations and spacing on cabinet or door faces.
The Emtek Georgetown glass knob is described as glass with a satin nickel reference, so the visible design combines a glass body with satin nickel elements.
The Emtek Georgetown glass knob is listed under Decorative Hardware and Moldings and Knobs, Emtek, so it serves as decorative knob hardware in project schedules.
The 86400US15 part number identifies this specific Emtek Georgetown glass knob model, which supports accurate ordering and documentation across multiple projects.
The satin nickel detail on the Emtek Georgetown glass knob defines a finish family, helping teams align it with other satin nickel hinges or decorative hardware.
The Georgetown glass knob is branded Emtek and listed as Knobs, Emtek, which helps designers and buyers stay within the same brand line on a project.
The Emtek Georgetown glass knob, with its 1-3/4 inch diameter and glass and satin nickel description, offers a clearly defined decorative knob choice that can be repeated across cabinet or door fronts for a consistent look. With categorization under Decorative Hardware and Moldings and Knobs, Emtek, this part fits directly into hardware schedules as a visible pull element rather than a concealed component. The 86400US15 manufacturer part number anchors this Georgetown glass knob in your ordering and documentation process, so future orders can match the original selection without requalifying options. Use this Emtek Georgetown glass knob when a glass knob paired with satin nickel detail aligns with the visual direction of your project and a single, repeatable part number supports your workflow.