Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Art Deco square backplate defines this piece as a dedicated trim plate for a knob, so it finishes the installation with a consistent look from the same manufacturer. The Emtek brand and Art Deco name identify it as part of a styled decorative hardware line, which helps match other Art Deco components in the same project. As a backplate specifically for a knob, it creates a visual base under the knob, tightening up the finished appearance on doors or cabinet fronts. The square form provides a clean geometric outline around the knob center point, which supports straight sightlines when aligning multiple knobs across doors or drawer fronts.
The 1-1/4 inch length called out in the name sets the approximate scale of the square backplate, guiding layout decisions on narrow or wider rails and stiles. The flat black designation in the title and SAP description aligns the finish to a dark US19 tone, so the color matches other Emtek US19 pieces in the same room. The manufacturer part number 86434US19 ties this exact square backplate to Emtek ordering and documentation, simplifying repeat orders on future phases or service work.
The product name specifies this item as a backplate for a knob, which focuses its use on installations where a knob already sets the primary function and the backplate adds a finished trim layer. Because it is described as square, installers can align the edges parallel to cabinet rails and stiles, creating consistent sightlines when multiple knobs repeat across a run of doors. The 1-1/4 inch length offers a reference for clearances around adjoining edges, helping plan knob centerlines so the backplate sits fully on the face material. The flat black or US19 finish designation anchors the color choice, so the knob and backplate combination reads as a coordinated unit rather than a mix of unrelated tones.
The Emtek naming and part number 86434US19 also assist during planning and documentation, because drawings and cut sheets can call out this exact Art Deco square backplate wherever the design needs that visual emphasis under a knob. On repeat projects or phased work, this clear identity supports consistent selection, which limits variation in the final hardware layout from one area to another.
The product title describes the Emtek Art Deco square backplate as intended for a knob, which positions it as a trim element behind a single pull point on doors or drawer fronts. The 1-1/4 inch length provides a compact square that visually frames the knob head without extending too far into surrounding panel details. This scale suits cabinet and furniture faces where hardware needs to stand out slightly while remaining proportional to smaller door and drawer sizes. The Art Deco descriptor places the styling in a geometric decorative family, making it suitable where straight lines and squared profiles repeat across the hardware package. The flat black or US19 finish lets the backplate add contrast or blend with dark surfaces, depending on the material it is mounted against.
Because the component is a backplate, it sits between the knob base and the mounting surface, so it visually enlarges the footprint of the knob installation. That extra visual base around the knob can help organize multiple knobs on paneled doors, framing each pull point with a consistent square outline. The Emtek branding and specific part number 86434US19 mean this backplate can be paired with other Emtek knobs described in the same finish, keeping the overall project within one coordinated decorative hardware line and simplifying ongoing selection.
The square form of this backplate, as called out in the product name, supports layout methods where the edges of the square are referenced to door or drawer edges. Installers can use the straight sides to align the piece parallel to adjacent rails, helping rows of knobs track cleanly across a bank of cabinets. The 1-1/4 inch length gives a fixed dimension for planning spacing between neighboring knobs, so designers can gauge how closely they can position pulls without overlapping the backplate edges. The flat black or US19 finish assignment keeps finish decisions straightforward, because any other Emtek components listed as US19 will align visually with this Art Deco square backplate in color tone.
The identification as a backplate for a knob also clarifies that it functions as a decorative layer rather than a primary load-bearing component, shaping expectations about its role in the assembly. The Emtek manufacturer part number 86434US19 provides a precise reference when documenting layouts or substitutions, so future work on the same installation can call for the identical Art Deco square backplate instead of a generic alternative. This level of detail supports consistent results across multiple cabinets, rooms, or project phases where the same knob and backplate combination is specified.
The Emtek 86434US19 piece is described as an Art Deco square backplate for a knob, so it functions as a decorative plate behind a knob on a door or cabinet front.
The Emtek Art Deco square backplate is identified as 1-1/4 inch in length, giving it a compact footprint that suits smaller cabinet doors, drawers, or similar applications.
The 86434US19 backplate is described as flat black and US19, indicating a dark finish that coordinates with other Emtek US19 decorative hardware pieces.
This Emtek Art Deco square piece is identified as a backplate for a knob, so it is intended to sit behind a knob rather than other hardware types.
The Art Deco wording in the name ties this square backplate to a geometric decorative style, supporting projects that feature structured lines and coordinated trim details.
The square shape provides straight edges around the knob center, helping align multiple knobs so their backplates track evenly along cabinet rails and stiles.
The Emtek Art Deco square backplate for knob, listed as 1-1/4 inch and flat black under part number 86434US19, gives projects a defined geometric trim element behind each knob. The combination of square form, compact size, and US19 flat black finish supports consistent layouts across cabinet doors, drawers, or furniture fronts. Because it is clearly labeled as part of an Art Deco decorative group from Emtek, it fits work where matching style and finish across all visible hardware is a priority. For projects built around Emtek decorative hardware, this specific Art Deco square backplate offers a repeatable choice whenever a knob needs a precise, coordinated visual base.