Emtek Spindle Cabinet Appliance Pull, Back-to-Back Mount, 18"CC, Polished Brass - BTB86344US3

Emtek Spindle Cabinet Appliance Pull For Built-Ins

Emtek Spindle Cabinet Appliance Pull gives cabinetmakers and installers a branded pull for appliance and cabinet fronts where a heavier handle look is desired. The pull is identified as a cabinet appliance pull, so it is suited to installations where cabinet doors or appliance panels are part of a kitchen or built-in run and need a substantial gripping point along the stile or rail.

This pull is built around an 18 inch center-to-center layout, matching the 18"CC designation in the name, so hole drilling can be planned precisely from the spec during layout and shop work. That fixed center spacing lets you repeat the same drilling pattern across multiple doors or panels, which supports consistent alignment from cabinet to cabinet.

The Spindle name and cabinet appliance pull classification place it in Emtek's decorative hardware line, so it functions as both a working handle and a visible design element on the finished installation.

Key Emtek Pull Details That Support The Job

• The 18"CC measurement describes the center-to-center distance between mounting points, which simplifies drilling jigs, CNC programs, or hand layout when setting up doors, drawer fronts, or appliance panels for this specific pull.
• The product type is a Spindle Cabinet Appliance Pull, so it is intended for use where a pull must handle regular door or panel operation while presenting a coordinating spindle-style profile across cabinets and built-in appliance fronts.
• The Emtek brand designation ties this pull to Emtek's decorative hardware family, which helps designers and builders coordinate this handle with other Emtek knobs or pulls on the same project for a unified appearance.
• The SAP description notes cabinet app pull and 18,PB, confirming that this piece is targeted to cabinet appliance applications at the 18 inch center spacing in a polished brass finish that can match other polished brass hardware choices.

Back-To-Back Mount Pull For Aligned Grips

This Emtek Spindle Cabinet Appliance Pull is specified as a back-to-back mount, which means it is designed to work in opposing pairs through a panel or door. That mounting style places a pull on each side of the material, so both faces of a cabinet or appliance panel present a usable grip at the same location.

Using the back-to-back mount layout, the installer can rely on the fixed 18 inch center-to-center spacing to align both pulls through the same bore pattern, which supports clean, straight hardware lines on both faces of the door or panel. The matching back-to-back arrangement helps create a balanced look wherever the panel is visible from both sides.

How This Emtek Pull Fits Cabinet And Appliance Work

Where The Spindle Cabinet Appliance Pull Is Used

The Emtek Spindle Cabinet Appliance Pull, Back-to-Back Mount, 18"CC, Polished Brass is suited to cabinet and appliance front applications where a longer handle is needed. The 18 inch center-to-center dimension sets this pull up for larger cabinet doors or panels, where a short knob or small pull would not span enough of the stile or rail for the look the designer is aiming for.

Because the pull is identified for cabinet appliance use, it aligns well with panels that conceal appliances within a cabinet run. In that setting, the handle acts as both the operating grip for the appliance panel and as a visual continuation of the hardware line across surrounding cabinets.

The polished brass identification in the SAP description (shown as PB) tells you the finish color family, so this pull fits projects where polished brass is the selected finish across hinges, knobs, and other decorative hardware. That helps maintain finish continuity across the entire installation.

Details That Help Repeatable Layout And Results

The explicit 18"CC notation in the product name gives installers a reliable center-to-center dimension before any layout begins, which supports precise drilling on site or in the shop. With that measurement clearly defined, templates or CNC programs can be set to the correct span and reused across multiple doors or panels without re-measuring for each piece.

The back-to-back mount designation indicates that the pull is intended to be mounted through the door or panel with a matching pull on the opposite side. That informs drilling depth and hole alignment, so both pulls share the same through-holes and sit directly opposite one another for a clean, finished appearance.

The Emtek brand and specific part number BTB86344US3 give project managers and millwork shops an exact reference when ordering or reordering. Using the manufacturer part number in documentation and cut lists reduces the chance of mixing different models or finishes on the same job.

Common Questions About This Emtek Appliance Pull

Select This Pull For 18 Inch Brass Appliance Runs

The Emtek Spindle Cabinet Appliance Pull, Back-to-Back Mount, 18"CC, Polished Brass - BTB86344US3 gives you a defined 18 inch center spacing, a cabinet appliance pull format, and a polished brass finish. Those details support clean layout, coordinated hardware selection, and consistent appearance on cabinet doors and appliance panels. For projects built around polished brass decorative hardware and longer appliance-style pulls, this Emtek model provides a clearly specified option that ties design and function together.