Panel Clip - Low Profile Male, Surface Mount for Wall and Ceiling Panels - LP-SMX, LP-SMX

LP-SMX Low Profile Male Clip For Panels

LP-SMX low profile male clip is a surface mount panel assembly fitting from Sugatsune America designed for wall and ceiling panel work where a shallow stand-off is important. This male clip mounts into steel, aluminum and fiberglass, so it can be used across metal framing, panel backs, and composite structures in one project. The LP-SMX fits into matching LP-F8 and LP-AF8A components, creating a defined connection point that controls panel location. A specified pull out force of 33 lbs, or 15 kg, gives you a clear handling limit when sizing panel sections and planning how many clips to use. The LP-SMX installs with 3x#6 countersink screws, so you can fasten through the clip into the base material using common fasteners while the countersink head sits flush for a cleaner surface and more accurate panel seating.

Key LP-SMX Details That Support Panel Work

• The LP-SMX low profile male clip is specified as a surface mount fitting, which keeps installation on the face of steel, aluminum or fiberglass substrates and simplifies layout when retrofitting or adding panels to existing structures.
• Mounting into steel, aluminum and fiberglass gives the LP-SMX flexibility across typical commercial and industrial framing or backing materials, letting you standardize on one male clip for mixed substrates on the same job.
• Designed to fit into LP-F8 and LP-AF8A components, the LP-SMX establishes a consistent interface that helps you repeat panel alignment from one location to another without changing clip geometry.
• A rated pull out force of 33 lbs, or 15 kg, defines the separation resistance for each clip, which helps when calculating clip quantity and spacing for wall and ceiling panels in use.
• Installation with 3x#6 countersink screws means the LP-SMX is secured with widely available fasteners, and the countersink head seats into the clip body so the screw head does not interfere with the mating LP-F8 or LP-AF8A part.

LP-SMX Surface Mount Clip Installation Use

The LP-SMX low profile surface mount male clip is built for direct mounting to steel, aluminum and fiberglass substrates, so installers can work on structural members, metal studs or composite backers without additional adapter plates. Because it fits into LP-F8 and LP-AF8A components, the LP-SMX defines a fixed engagement depth that helps panels seat consistently on both walls and ceilings. Using 3x#6 countersink screws, installers drive through preformed openings in the LP-SMX into the base material, with the countersink profile helping screw heads sit flush inside the clip. With a 33 lbs (15 kg) pull out force rating, the LP-SMX provides a clear reference when determining the number of clips to distribute across each panel area.

Using LP-SMX Clips In Real Panel Projects

Where The LP-SMX Male Clip Is Applied

The LP-SMX low profile male clip from Sugatsune America is described for wall and ceiling panels, so it serves as a fastening point where removable or serviceable panels are needed around mechanicals or utilities. Because it mounts into steel, aluminum and fiberglass, it can be secured directly to metal framing, structural angles, sheet substrates or molded fiberglass components that form the backing for finished panels. The LP-SMX fits into LP-F8 and LP-AF8A components, so once those corresponding parts are fixed to the mating surface or panel, the LP-SMX acts as the opposing half of the connection. That relationship allows the same LP-SMX clip to be used across different LP-F8 or LP-AF8A layouts while keeping a consistent connection geometry along a run of wall or ceiling panels.

How LP-SMX Details Support Consistent Results

The LP-SMX surface mount male clip relies on 3x#6 countersink screws for installation, which means the clip is anchored with three points of contact that help resist rotation on the substrate during panel engagement. The countersink screw design allows the heads to sit within the clip body, so they do not project into the mating area and interfere with how the LP-SMX enters the LP-F8 or LP-AF8A. A specified pull out force of 33 lbs, or 15 kg, defines how much direct separation load one LP-SMX connection supports, giving planners a numeric basis for clip spacing on wall and ceiling applications. Since the LP-SMX is identified as a low profile male clip, it keeps the projection off the mounting surface minimized, helping panels sit closer to the structure, which can matter where space above ceilings or behind walls is limited.

Focused Questions About The LP-SMX Clip

Select The LP-SMX Clip For Panel Mounting

The LP-SMX low profile male clip from Sugatsune America gives wall and ceiling panel installers a defined surface mount fitting that works with steel, aluminum and fiberglass substrates. By fitting into LP-F8 and LP-AF8A components, and using 3x#6 countersink screws with a rated 33 lbs (15 kg) pull out force, the LP-SMX offers clear, published installation and load details. For panel mounting setups that call for a low profile male clip with these characteristics, the LP-SMX provides a documented connection point to build around.