Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge 3518-46 describes a Formica Corporation laminate bullnose edge molding that finishes exposed edges with a continuous curved profile, which helps create a smooth, finished transition on laminate surfaces in cabinet and countertop work. The product is identified as a laminate edge molding in the decorative edge moldings category, so it is designed as the visible trim piece that completes the edge of a laminate surface, keeping the construction beneath visually covered in finished installations. The Flint Crystal Etchings finish noted in the description ties the molding appearance to the matching Formica Flint Crystal design family, allowing the edge detail to visually coordinate with adjacent laminate panels where that decor is used. Because this component is purpose-built as an IdealEdge molding, it serves specifically as a decorative and functional termination at the edge of a laminate work surface or panel.
The Formica IdealEdge 3518-46 Flint Crystal bullnose edge molding is listed at 1-1/2 inch height, which gives installers a reference dimension for covering substrate thickness at the edge of laminate workpieces where this trim is applied. The 144 inch length noted in the product name provides a long, continuous run suitable for straight edges up to that span, which can reduce the need for joints along the edge in many cabinet or countertop layouts. Because this product is specifically described as bullnose edge molding within laminate edge moldings, it is intended to align along the outer edge of a laminate-clad surface, allowing the curved profile to define the finished front or exposed side.
This Formica Corporation IdealEdge Flint Crystal Etchings finish bullnose edge molding is positioned within the edgebanding and surfacing family, so it is intended for use wherever laminate surfaces meet an exposed edge that needs a finished transition. The 1-1/2 inch height noted in the product name makes the molding suitable for edges where that face dimension matches or slightly exceeds the combined thickness of laminate and its underlying build-up, so the decorative surface can visually cover the edge detail in a single component. The 144 inch length supports use along extended edges such as long cabinet runs or work surfaces, giving fabricators a single piece to carry the Flint Crystal look across the span without introducing intermediate edge breaks in typical layouts. Being defined as bullnose edge molding means its shape is tailored to act as the visible front edge, so it is selected specifically for locations where a rounded edge presentation is desired on a laminate installation.
The specific Manufacturer Part Number 035182046D12000 uniquely identifies this Flint Crystal Etchings finish bullnose edge molding within the Formica IdealEdge offering, which helps shops re-order the exact same profile and decor for future phases or repair work so the finished edges remain visually consistent. Because the product is clearly categorized as a laminate edge molding in decorative edge moldings, it provides installers with clarity that this component is engineered as an edge solution, guiding its use to trim conditions rather than broad surface coverage. The combination of 1-1/2 inch height and 144 inch length described in the product name simplifies layout planning, since those dimensions define how much linear and vertical coverage a single piece provides when trimming laminate projects. Aligning the Flint Crystal Etchings finish name with the IdealEdge designation in the description means the decorative pattern on this molding is intended to coordinate with Formica Flint Crystal laminate designs, which supports visually uniform installations when the same pattern is carried from field surfaces onto the edge detail.
Formica IdealEdge 3518-46 is a laminate bullnose edge molding used to finish exposed laminate edges, so cabinet and countertop projects gain a coordinated, rounded front or side profile.
The Flint Crystal Etchings finish bullnose edge molding is listed at 1-1/2 inch height and 144 inch length, giving a defined face dimension and a long run for edge applications.
This molding is described as bullnose edge molding, meaning the profile is rounded at the outer edge, which creates a softer, curved transition instead of a sharp corner on laminate fronts.
The Flint Crystal Etchings finish description ties the molding decor to the Flint Crystal design family, so the edge visually aligns with Formica laminate surfaces using that pattern.
This edge molding is produced by Formica Corporation, which defines it within their Formica IdealEdge laminate edge moldings line for decorative laminate edge finishing.
The Manufacturer Part Number 035182046D12000 uniquely identifies this Formica IdealEdge Flint Crystal Etchings bullnose edge molding, allowing the exact profile and finish to be specified.
The Formica IdealEdge 3518-46 Flint Crystal Etchings finish bullnose edge molding offers a defined 1-1/2 inch height and 144 inch length, giving you clear coverage parameters when planning laminate edge details around cabinets and work surfaces. As a laminate edge molding within decorative edge moldings, it is purpose-built to act as the finished bullnose front or exposed side, so the Flint Crystal decor can carry cleanly from the laminate field onto the edge. Using the specific Manufacturer Part Number 035182046D12000 ties your selection directly to this profile and finish, supporting consistent Flint Crystal edge appearance across current and future laminate installations.
Sold In: 1 Each
