Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Olympus DCN1 pin tumbler cam lock is a zinc die cast cam lock designed for installations using 3/4 inch material thickness, so it matches common cabinet and fixture construction without extra shimming. The flat black finish provides a dark, uniform appearance that blends into modern casework and display applications where visible hardware should stay unobtrusive. The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, lets this lock be keyed together with other N Series locks, which simplifies key management across multiple doors or panels. The pin tumbler cylinder in zinc die cast construction provides a familiar commercial lock format that aligns with standard key cutting and service practices. Standard function keeps the key removable in locked or unlocked position, allowing installers or staff to remove keys after locking or leave cylinders operable without tying operation to key retention.
This DCN1-US19-KD cam lock is specified for 3/4 inch material thickness, so the cylinder length and cam engagement are set up for standard cabinet and fixture panels without modifying the door or drawer thickness. The 1 inch face is sized to span the drilled hole and surrounding fibers, which lets the installer drill a functional hole and rely on the face to mask minor chipping at the edge. Two reversible cams that work in all positions allow the cam to be oriented to pull or push against strikes or frames, so the same unit handles left-hand or right-hand layouts. The standard function, with key removable in locked or unlocked positions, lets installers set up operation to match site procedures without depending on captive-key behavior.
This cam lock fits 3/4 inch material thickness, aligning with typical cabinet doors, drawers, and access panels so the cam can throw behind a frame or keeper with proper engagement. Two reversible cams that operate in all positions allow you to select a straight or offset action and rotate the cam to suit swinging or sliding panels, which is useful when working across mixed casework on the same project. The 1 inch face is designed to cover splintering, so even when drilling through laminated or veneered sheet stock, the visible trim masks minor chipping and promotes a professional appearance. Flat black finish ties in with dark pulls and hinges, giving visual consistency across hardware on contemporary commercial or residential installations.
The N Series keyway, equivalent to National D4291 4-pin or D4292 5-pin systems, means this cam lock can be keyed together with other N Series locks, allowing larger installations to run one key across multiple doors and compartments. The product is easily rekeyable via the cylinder retainer clip, so locksmiths or maintenance teams can change keying without changing the entire cam lock body, which reduces downtime and material waste. Stock keying supports KD or KA with 4 pin standard setups, with stock KA numbers 101, 103, 107, and 915, so common keyed-alike schemes are straightforward to build across groups of locks. The lock is masterkeyed at 5 pin standard with grand masterkeyed capability available, supporting layered key control in offices, institutions, or retail spaces where different staff levels need different access. Passing ANSI/BHMA A156.11 Grade 1 performance requirements, and being equivalent to E07261 / E07271, signals that the cam lock has been tested for heavy-duty cycles and security performance suitable for commercial-grade use. Olympus Lock, Inc. construction using zinc die cast for both body and cylinder supports precise pin tumbler alignment, which helps keys operate smoothly and supports long-term service in high-traffic environments.
The Olympus DCN1 pin tumbler cam lock is designed for 3/4 inch material thickness, so its cylinder length and cam reach suit standard cabinet and fixture panels.
The N Series keyway, equivalent to National D4291 or D4292 systems, allows this lock to be keyed together with other N Series locks, simplifying keying across many openings.
The Olympus DCN1 cam lock is easily rekeyable via the cylinder retainer clip, so cylinders can be reconfigured while keeping the same installed lock body.
This cam lock has passed ANSI/BHMA A156.11 Grade 1 performance requirements, indicating it is tested for demanding, heavy-duty cam lock applications.
The standard function allows key removal in the locked or unlocked position, giving flexibility in how users carry or store keys during normal operation.
The 1 inch face covers splintering around the drilled hole, so minor tear-out in wood or composite materials remains hidden and the visible hardware looks clean.
The DCN1-US19-KD flat black cam lock combines a zinc die cast pin tumbler cylinder, 3/4 inch material thickness design, and N Series keyway to support keyed-alike or masterkeyed systems across cabinets and fixtures. Two reversible cams that operate in all positions, a 1 inch face that covers splintering, and ANSI/BHMA A156.11 Grade 1 performance make it suitable for commercial and institutional workloads. For projects built around N Series keying where 3/4 inch material and flat black hardware are specified, this Olympus Lock, Inc. model provides a focused cam lock solution.
Sold In: 1 Each
