Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge River Gold defines this 1-1/2 inch high laminate edge molding that finishes exposed edges on countertops, islands, desks, and work stations. The River Gold pattern in the Etchings finish creates a coordinated edge that visually ties into Formica surfacing, so exposed sides read as a continuous surface rather than a separate strip. The 1-1/2 inch profile height covers standard countertop build-ups, limiting exposed substrate along the edge and helping the finished top look more uniform in elevation. The 144 inch, or 12 foot, length spans long runs such as island legs or work stations in one piece, reducing seams along the edge that would otherwise interrupt the detail. As a laminate edge molding, the profile is shaped for edge use, which simplifies layout on straight or shaped runs where a square band would require extra work on site.
This Formica IdealEdge laminate edge molding is designed for use with glue, with the description identifying AFF522 series adhesive as the recommended glue sold separately, so bond selection is already matched to the material type. The 1-1/2 inch height gives installers room to flush-trim both top and bottom after bonding, instead of trying to set the strip perfectly in one pass, which saves time at the router table or on-site with a handheld trimmer. Suitability for straight, curved, clipped, and 90 degree edges means the same installation approach carries from long straight counter runs into radius corners or clipped islands, limiting the need for different jigs. The MDF core machines like a predictable wood-based substrate during trimming and edge shaping, which keeps bit wear more consistent and helps maintain a smooth cut line along the laminate face.
This IdealEdge River Gold Etchings finish molding is specified for countertops, islands, desks, and work stations, so it serves as a single edge solution across multiple horizontal surfaces in a project. On a kitchen island, the 12 foot length spans tall waterfall-style runs or extended overhangs, letting the same River Gold edge detail continue around outside corners and long sides. In office or commercial work stations, the suitability for straight and curved edges supports continuous edging along return surfaces and radius end panels using the same part. For desks, the ability to work on clipped and 90 degree edges allows the front edge, returns, and gables to share the same River Gold profile, tying the furniture visually together. Because this molding belongs to the laminate edge moldings product class, it aligns with laminate tops and helps coordinate color and finish between the surface and the vertical edge.
The Etchings finish on the River Gold pattern establishes a defined surface character on the molding, so when it is aligned to matching or coordinating laminate tops, the joint between top and edge reads as intentional rather than improvised. The 1-1/2 inch profile height offers coverage for typical countertop and work surface build-ups, which means the transition from horizontal surface to vertical edge can be set at a consistent reveal without exposing core material. The MDF core supports repeatable routing and trimming behavior along the entire 144 inch length, so cut quality on the first miters matches the last cuts on the run. The moisture barrier adds another layer of support at the high-risk front edge area, where incidental spills or cleaning contact concentrate, helping the bond line between laminate and core maintain integrity. Using the same profile on straight, curved, clipped, and 90 degree edges keeps layout and corner treatments consistent from one station or cabinet run to the next.
This Formica IdealEdge River Gold molding is 1-1/2 inches high and 144 inches long, which covers standard edge build-ups and allows long runs to be handled in a single piece.
This laminate edge molding is intended for countertops, islands, desks, and work stations, so it can carry a consistent River Gold detail across multiple types of horizontal surfaces.
This IdealEdge profile is suitable for straight, curved, clipped, and 90 degree edges, letting one molding type wrap around corners and radius details without changing products.
This Formica edge molding uses an MDF core, which machines predictably during trimming and helps create smooth routed edges along the River Gold laminate face.
The moisture barrier in this molding helps resist incidental moisture at the edge, supporting the bond between laminate and MDF core in typical kitchen or work environments.
This IdealEdge molding is matched to AFF522 series glue, identified as the recommended adhesive sold separately for bonding the molding during installation.
This Formica IdealEdge River Gold 1-1/2 inch high, 144 inch long laminate edge molding from Formica Corporation combines a defined Etchings finish pattern, MDF core, and moisture barrier in one profile. Suitability for straight, curved, clipped, and 90 degree edges means one molding part spans most countertop, island, desk, and work station layouts, simplifying material choices. The specified use with AFF522 series glue gives a clear adhesive direction for bonding the edge. For projects built around River Gold laminate surfaces, this IdealEdge profile offers a coordinated way to finish exposed edges with a matching pattern and controlled edge geometry.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AFF522-1G Mfr# F-522-01 | F522 IdealEdge Fastset Wood Glue, White, 1 Gallon Jug |