Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
T625 30W LED Plug-In Power Supply gives a 12 Volt DC output at up to 30 Watt, supplying constant voltage so Tresco LED fixtures run at the correct load and brightness during everyday cabinet or display lighting use. The 6 port block on this power supply lets you connect multiple Tresco fixtures to one source, simplifying layout when you are distributing low-voltage runs across a kitchen, office, or retail installation. Its slim design at under 1 inch height allows this driver to sit behind cabinets or inside tight recesses, opening up mounting options where space is limited. The high power factor greater than .95 means more of the input power is converted to usable 12V output, which helps keep the system efficient on larger lighting runs. Class 2 and UL Listed construction identifies this as a recognized driver for typical woodworking and interior projects using low-voltage LED lighting.
This 12VDC 30W Plug-In Power Supply uses a plug-in power cord, so it connects to a standard outlet while delivering low-voltage output at the driver ports for lighting runs. The 6-Snap mounting block is designed to accept up to six low-voltage connections, which centralizes wiring and keeps runs organized when you route cables along cabinets or furniture. Dimming takes place on the 12 V side with trailing edge control, meaning that light level adjustments occur on the low-voltage output rather than through a hardwire wall dimmer. The Class 2 rating and UL Listing define its construction and testing level, aligning this driver with common requirements for interior LED lighting systems that use Tresco fixtures and matching components.
This Tresco Lighting driver operates as a constant voltage 12 Volt DC source, feeding compatible Tresco fixtures across cabinet, display, or furniture projects that call for low-voltage LED runs. Its 30 Watt capacity means you size the total connected fixtures so their combined load does not exceed the driver rating, which maintains consistent operation over the life of the installation. The 6 port block concentrates output connections at a single hub, so you can send separate leads to different sections of a kitchen, office casework, or shelving while still returning them to one driver. With a slim profile under 1 inch tall, this power supply tucks into shallow spaces such as behind valances or inside narrow compartments, keeping the power source close to the fixtures without occupying useful storage or display volume.
The constant voltage design keeps the 12 Volt DC output steady under normal loading, helping Tresco fixtures maintain even brightness from one run to the next during daily use. A high power factor greater than .95 provides efficient conversion from line power to low-voltage output, which supports longer runs or multiple fixtures up to the 30 Watt limit without excessive wasted energy inside the driver. Integrated short circuit and overload protection with automatic reset allow the driver to respond to wiring faults by shutting down and then returning to operation after the fault clears, reducing the chance of permanent driver damage during installation changes or service. Overcurrent protection adds another layer that limits excessive draw, protecting both the driver electronics and the attached LED fixtures when loads are added or rearranged. RFI protection reduces radio-frequency emissions from the driver circuitry, supporting cleaner operation around radios, communication devices, and sensitive shop or office electronics. Trailing edge dimmable behavior on the 12 V side gives low-voltage dimming capability with appropriate controls, which helps you tune light levels for tasks, accent lighting, or display emphasis without swapping fixtures.
The T625 30W LED Plug-In Power Supply provides 12 Volt DC constant voltage, supporting Tresco LED fixtures that are designed to operate on a stable low-voltage supply.
The 12VDC 30W Plug-In Power Supply supports up to 30 Watt of connected LED fixtures, allowing you to plan total fixture wattage within that limit for proper operation.
The power supply uses a 6 port block, so up to six low-voltage connections can be organized from a single driver location for separate cabinet or display runs.
The T625 30W LED Plug-In Power Supply is dimmable on the trailing edge on the 12 Volt side, supporting low-voltage dimming instead of hardwire wall dimmers.
This Tresco driver provides short circuit, overload, and overcurrent protection with automatic reset, plus RFI protection, supporting durable low-voltage lighting systems.
The T625 30W LED Plug-In Power Supply is a Class 2, UL Listed driver, aligning it with recognized safety and performance standards for low-voltage lighting.
The T625 30W LED Plug-In Power Supply with 6 port block from Tresco Lighting provides 12 Volt DC constant voltage output, 30 Watt capacity, and trailing edge dimmable control on the 12 V side for LED projects. Its slim design, integrated protection features, RFI protection, and Class 2 UL Listed status align it with interior cabinet, display, and furniture lighting layouts using Tresco fixtures. For projects using genuine Tresco transformers, power cables, connecting cables, and switches, this driver serves as the central low-voltage source that matches Tresco system requirements.
Sold In: 1 Each