Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Spindle appliance pull is designed as a 12 inch Center to Center back to back appliance pull for glass shower doors, so it functions as a solid gripping point on both sides of the glass. The Polished Nickel finish provides a refined look that visually matches bathrooms built around bright metal trims. This pull is built for glass shower door use, so it supports doors where through-bolted grip is preferred over surface mounts. The back to back configuration connects both sides through the glass, which helps create a stable, balanced feel when opening or closing the door. The 12 inch Center to Center size gives plenty of hand space along the door, which is useful on taller glass panels or wider openings. The Emtek brand and specific part designation GBTB86343US14 identify this as a Spindle series appliance pull for jobs requiring consistent matching hardware.
The Emtek Spindle appliance pull is stated to fit glass door thickness between 1/4 inch and 1/2 inch only, which defines the workable range for shower panels and side lights using this pull. That thickness window matters because the through-bolt connection must clamp properly on the glass without excessive projection or insufficient thread engagement. The pull is described as back to back for glass shower doors, which means the two grips are aligned through a bored hole set, creating a secure mechanical connection in the glass panel. The 12 inch Center to Center measurement gives layout guidance when locating holes in the glass, helping fabricators or installers align the pull consistently across multiple doors or panels on the same job.
The Emtek Spindle appliance pull is crafted for glass shower doors, so its primary use is on framed or frameless glass panels within that 1/4 inch to 1/2 inch thickness range. The 12 inch Center to Center span gives the pull a substantial presence on the glass, which suits full height shower doors where users prefer a longer gripping surface. The Polished Nickel finish aligns visually with many contemporary and transitional bath designs, making this pull appropriate wherever matching metal finishes are planned across fittings. The back to back configuration allows a grip on each side of the panel, so this hardware works well on main shower entries where traffic flows in both directions. The defined glass thickness range between 1/4 inch and 1/2 inch lets door fabricators plan panel stock knowing the pull is intended to clamp effectively on those sizes.
The Emtek Spindle appliance pull uses a 12 inch Center to Center measurement, which helps standardize drilling patterns for glass suppliers, reducing layout variation from door to door. The stated fit for glass door thickness between 1/4 inch and 1/2 inch sets a clear parameter for the clamping stack, supporting predictable hardware engagement in a typical shower environment. The pull is specified as back to back for glass shower doors, so both sides are mechanically tied together, which can contribute to even load distribution across the mounting points. The Polished Nickel finish on this pull allows specifiers to keep a consistent metal tone when scheduling related bath hardware, contributing to coherent project results. The Emtek Spindle appliance pull designation and part number GBTB86343US14 help installers and buyers match replacement or additional pulls to existing installations without requalifying design details.
The Emtek Spindle appliance pull is crafted for glass shower doors, so it is intended for use on glass panels in shower openings.
The Emtek Spindle appliance pull fits glass door thickness between 1/4 inch and 1/2 inch only, setting the usable range for shower panels.
The Emtek Spindle appliance pull is a 12 inch Center to Center pull, which guides drilling and layout on the glass door.
The Emtek Spindle appliance pull is described as a glass shower door back to back appliance pull, giving a grip on each side of the panel.
The Emtek GBTB86343US14 pull uses a Polished Nickel finish, matching many bright metallic bathroom fixtures.
The pull is from Emtek and carries manufacturer part number GBTB86343US14, identifying it as a Spindle appliance pull model.
The Emtek Spindle appliance pull, identified as GBTB86343US14, brings a 12 inch Center to Center back to back design to glass shower doors that fall between 1/4 inch and 1/2 inch thick. That combination of defined glass thickness range and fixed mounting span helps installers and fabricators coordinate drilling, door sizing, and hardware selection around a known specification. The Polished Nickel finish lets project planners align this pull with other bright bath metals, keeping a consistent visual scheme. For shower doors calling for a through-glass, back to back pull in this size and finish, this Emtek Spindle appliance pull provides a clearly defined option to integrate into current jobs or future standard details.