Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek contemporary bar appliance pull is designed for glass shower doors, so it gives a purpose-built gripping point where a standard cabinet pull will not work. The pull is described as a glass shower door back to back appliance pull, which means it creates a solid gripping surface on both sides of the glass for controlled door operation. Its 12 inch center to center size spreads hand load along the glass, which supports comfortable use on taller or heavier glass doors. The finish is Satin Brass, so the pull presents a warm metallic tone that coordinates with Satin Brass trim in the same space. The pull is identified with manufacturer part number GBTB86351US4, which ties directly to this specific back to back glass application and helps match it to other Emtek components on the job.
The pull is specified to fit glass door thickness between 1/4 inch and 1/2 inch only, which defines the glass panels where the clamping assembly can work correctly. This thickness range allows installers to match the pull to common shower glass sizes without trial and error. The description notes that it uses a back to back arrangement on the glass, so the two grips tie through the panel instead of relying on surface mounting, which helps keep the hardware tight under normal door operation. With a 12 inch center to center dimension, layout on the glass can be planned accurately so the holes line up with the bar length and visual lines of the enclosure.
The product is described specifically as an Emtek Contemporary Bar appliance pull for glass shower doors, so its primary use is on glass door panels rather than wood or metal doors. The back to back description shows that one grip is on the inside of the shower and the mating grip is on the outside, giving users a secure hold from either side. The 12 inch center to center measurement suits many full-height shower doors because it offers a taller handhold than short cabinet pulls, which can be helpful when users raise or lower their hand position on the bar. Being part of the decorative hardware and moldings handles and pulls category places it in projects where the visual line of the bar and the finish coordination matter alongside basic function.
The pull uses one grip with #10-32 threads in the stem, which provides a machine thread interface that seats firmly into the glass-mounted assembly. A mating grip with a 3/8 inch diameter hole in the stem aligns with that threaded side, so the two pieces pair consistently from job to job. The hardware description specifies 3/8 inch diameter bevel head screws with #10-32 threads in two lengths, 3/4 inch and 7/8 inch, which allows installers to select the screw length that matches the actual glass thickness within the 1/4 inch to 1/2 inch range. That pairing supports solid thread engagement without excess projection beyond the stem. A set of gaskets is noted, which provides a buffer between the metal components and the glass surface and helps distribute clamping force across the panel. Together with the defined center to center dimension, these details give installers predictable alignment and help them achieve a consistent feel across multiple shower openings on the same project.
The Emtek Contemporary Bar appliance pull is designed for glass shower doors, so it is suited to glass panels where a back to back pull is required.
The 12 inch center to center dimension is the distance between the mounting points, which guides drilling on the glass and defines the usable gripping length.
The pull fits glass door thickness between 1/4 inch and 1/2 inch, so it matches many common shower glass sizes within that range.
The pull uses one grip with #10-32 threads and a mating grip with a 3/8 inch diameter hole, joined through the glass for a back to back configuration.
The appliance pull uses 3/8 inch diameter bevel head screws with #10-32 threads in 3/4 inch and 7/8 inch lengths, giving options to match the glass thickness range.
The GBTB86351US4 model is finished in Satin Brass, so it coordinates with Satin Brass fixtures and trim in the same shower or bathroom.
The Emtek contemporary bar appliance pull, identified as a glass shower door back to back pull, offers a 12 inch center to center layout that suits many full-height glass doors. With its Satin Brass finish and 1/4 inch to 1/2 inch glass thickness fit, it aligns cleanly with defined shower glass specifications. The combination of threaded and mating stems, bevel head screws in two lengths, and gasket support is specified to clamp to the glass panel effectively. For projects that call for a contemporary bar style and controlled grip on both sides of the glass, this model provides a clearly defined set of dimensions and components to plan around.