Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Contemporary Trinity appliance pull is designed as a back to back grip for glass shower doors, so it gives a solid handhold on both sides of the panel where a secure pull is needed. This 12 inch center to center layout sets the mounting points at a consistent spacing, which helps align drilling and keeps multiple doors visually coordinated in a run. The flat black finish defines the appearance of the pull, supporting a modern look that ties in with other dark bath hardware on the job. The pull is configured with a grip that uses #10-32 threads in the stem, matching the specified fastener threads for a positive mechanical connection. A mating grip on the opposite side uses a 3/8 inch diameter hole in the stem, so the assembly clamps onto the glass through the door thickness.
This Emtek glass shower door pull is specified to fit glass door thickness between 1/4 inch and 1/2 inch only, so its clamping range is tailored to common shower glass sizes. That thickness range defines how the opposing grips draw together, helping the assembly seat firmly without overextending on standard shower panels. The back to back layout uses one threaded stem and one 3/8 inch diameter stem hole, allowing the pull to compress against the glass surface from both sides when the specified screws engage. With the 12 inch center to center dimension fixed, installers can coordinate drilling jigs or templates around that spacing for repeatable placement across multiple doors in a project.
The Emtek Contemporary Trinity appliance pull is described specifically for glass shower doors, so it functions as a primary gripping point on swinging or sliding glass panels in wet areas. Its ability to fit glass thickness between 1/4 inch and 1/2 inch defines the panel types it can serve, aligning with many residential and light commercial shower enclosures formed from tempered glass in that range. The back to back configuration places a grip on each side of the glass, which suits doors that need a handhold from both the bath side and the dry side without relying on surface-mounted hardware. With the 12 inch center to center spacing, the pull spans enough height on the glass to give a comfortable grasp area for most users, while still fitting typical shower door proportions.
The Contemporary Trinity appliance pull uses a stem with #10-32 threads on one grip, paired to a mating grip with a 3/8 inch diameter hole in the stem, so the specified screws draw the two sides together consistently through the glass. That designed interface supports even clamping pressure across the described 1/4 inch to 1/2 inch glass thickness range, which matters when setting hardware on brittle glass materials. The 3/8 inch stem diameter noted for the mating grip establishes the hole size that relates to the fasteners and stem, helping align the hardware when tightening. Because the center to center dimension is 12 inches, installers can standardize drilling patterns on templates, which helps reduce layout time and keeps multiple shower doors visually uniform. The flat black finish stated for this pull ties these functional details into a single piece of trim that coordinates with matching fixtures, so the installed result looks intentional across the project.
The Emtek Contemporary Trinity appliance pull is crafted for glass shower doors, so it serves as the gripping hardware on glass panels in shower enclosures.
This Emtek Trinity glass door pull fits glass door thickness between 1/4 inch and 1/2 inch only, which targets common shower glass sizes used in many installations.
The Contemporary Trinity appliance pull has a 12 inch center to center dimension, defining the distance between mounting points for drilling layouts on the glass.
This Emtek pull uses one grip with #10-32 threads in the stem and a mating grip with a 3/8 inch diameter stem hole, so they clamp together through the glass thickness.
The Emtek Contemporary Trinity appliance pull is finished in flat black, which gives the hardware a dark, modern look that coordinates with similar bath fittings.
The manufacturer part number GBTB86444US19 identifies this exact Emtek Contemporary Trinity appliance pull, helping align it with project specifications or reorder needs.
The Emtek Contemporary Trinity appliance pull, model GBTB86444US19, offers a 12 inch center to center back to back layout for glass shower doors, so it lines up with projects that call for that spacing. Its stated fit for glass between 1/4 inch and 1/2 inch targets typical shower door thickness, simplifying product selection when those panel sizes are used. With a flat black finish, the pull supports contemporary design schemes that rely on dark metal accents around clear glass. For jobs that specify an Emtek glass shower door pull with threaded and mating stems configured as described, this piece aligns closely with those requirements.