Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Habitat appliance pull is designed as a back to back grip for glass shower doors, giving a coordinated handle on each side so users get a solid, familiar handhold every time the door moves. This 12 inch Center to Center layout spaces the grips for full-hand leverage along the glass, which helps heavier doors swing smoothly in everyday use. The polished nickel finish on this pull sets a consistent, reflective surface across the handle, so the hardware ties into other polished nickel fixtures in the bathroom. As part of Emtek decorative hardware, this handle keeps the look aligned with other Emtek pieces on the job, which simplifies hardware selection on multi-opening projects.
This Emtek Habitat appliance pull is stated to fit glass door thickness between 1/4 inch and 1/2 inch only, so it targets common shower glass sizes used on many residential and light commercial installations. That fixed thickness range lets installers plan hole locations and hardware layout knowing the pull is centered around typical tempered glass dimensions. The back to back style keeps the hardware clamping across the glass, which supports a consistent feel when sliding or swinging the panel. With the 12 inch Center to Center arrangement, the handle extends across a practical section of the glass, which helps users get a secure grip even when hands are wet.
The Emtek Habitat appliance pull, glass shower door back to back style, is intended for glass shower doors that fall between 1/4 inch and 1/2 inch in thickness, so it serves most standard residential shower enclosures using tempered glass in that range. The 12 inch Center to Center length positions the grips over a generous vertical span, which works well on taller shower doors where users may grab the handle at different heights. As a back to back configuration, this pull is oriented for doors that need a grip on the inside and outside surfaces, such as swing or pivot shower doors that users operate from both sides during regular bathroom routines.
The polished nickel finish specified for this pull lets it sit visually alongside polished nickel shower valves, trim, and towel bars, which keeps the hardware package unified across the room. Being part of Emtek decorative hardware, this Habitat pull aligns with other Emtek handles and pulls, supporting projects where designers or installers repeat a hardware family from the vanity to the shower area. The clear labeling as an appliance pull for glass shower doors guides its use to that role, so it fits into layouts where a substantial, two-sided handle is preferred over smaller knobs.
The defined 12 inch Center to Center measurement on this Emtek Habitat appliance pull gives installers a precise drilling layout on the glass, which helps avoid alignment issues that can show up against grout lines, jambs, or adjacent panels. Because the pull is specified as back to back, the working hardware clamps through the glass with a matched pair of grips, so the user experiences the same feel and leverage whether opening from the bathroom side or from inside the shower. The stated fit for glass door thickness between 1/4 inch and 1/2 inch narrows the application window, which supports consistent clamping pressure across typical shower glass thicknesses.
The polished nickel finish on this glass shower door pull sets a consistent sheen from end to end, which helps installers and designers maintain a coordinated look when matching with other polished nickel pieces in the same project. The Emtek branding and GBTB86628US14 manufacturer part number provide a stable reference for ordering and documentation, which matters on multi-unit jobs where every opening must follow the same hardware schedule. By combining a defined thickness range, a fixed Center to Center dimension, and a two-sided layout, this pull supports repeatable installations across multiple similar shower doors.
The Emtek Habitat appliance pull is designed for glass shower doors, so it fits projects where a substantial handle is needed on both sides of a glass shower panel.
This Emtek Habitat appliance pull fits glass door thickness between 1/4 inch and 1/2 inch only, which aligns with many standard tempered glass shower door panels.
The Emtek Habitat appliance pull provides a 12 inch Center to Center length, giving users an extended grip area that helps control taller or heavier glass shower doors.
This Emtek Habitat pull is a back to back design, meaning there is a grip on each side of the glass so the shower door can be comfortably operated from either side.
This version of the Emtek Habitat appliance pull is finished in polished nickel, which visually coordinates with polished nickel shower fixtures and decorative hardware.
The manufacturer part number for this polished nickel Emtek Habitat glass shower door back to back pull is GBTB86628US14, which helps with purchasing and future reorders.
The Emtek Habitat appliance pull, glass shower door back to back style, combines a 12 inch Center to Center layout with a polished nickel finish and a thickness range of 1/4 inch to 1/2 inch, so it aligns well with standard glass shower door construction. On projects where polished nickel fixtures are already specified, this handle keeps the hardware line visually consistent from faucets to door grips. For installers and specifiers who want a clearly identified Emtek component, the Habitat name and GBTB86628US14 part number provide an exact reference to use across drawings, orders, and future expansions.