Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Industrial Modern Jasper appliance pull defines this hardware as a dedicated pull designed for glass shower doors, giving installers a clear, project-ready solution for wet-area openings. The pull is built as a back to back appliance pull, so you get a gripping point on each side of the glass, which helps users operate heavier doors with a steady, centered handhold. Its 12 inch Center to Center dimension sets fixed hole spacing, which matters when drilling tempered glass or lining up with pre-bored holes. The Oil Rubbed Bronze finish puts a dark, refined surface on the hardware, helping it coordinate with common bronze or dark plumbing trims across a bathroom. This pull is crafted for glass shower door use, so its construction and configuration support daily door operation more like an appliance handle than a small cabinet pull.
This Emtek glass shower door back to back pull is engineered specifically for glass, so the installation workflow centers on drilling and clamping through the panel. Its design fits glass door thickness between 1/4 inch - 1/2 inch only, which defines the acceptable glass range for a secure assembly. That thickness window helps installers plan glass specs and drilling before fabrication, so the grip and mating grip clamp correctly against the surfaces. The pull uses #10-32 threads in one stem and a mating grip with a 3/8 inch diameter hole in the other stem, creating a through-glass connection point. This threaded-and-hole combination allows the fasteners specified for the pull to draw the two sides together, which supports a tight, stable mount on the glass.
This Emtek Industrial Modern Jasper appliance pull is crafted for glass shower doors, so its geometry and hardware interface are tailored to non-framed glass panels. The pull is configured as a back to back appliance pull, which means one grip sits on each face of the glass to serve interior and exterior users. It fits glass door thickness between 1/4 inch - 1/2 inch only, giving a defined envelope for glass selection on both new installations and replacements. That thickness range supports common shower glass sizes, so shop drawings and field templates can be prepared with confidence around the stated values. By focusing on this thickness window, the pull achieves proper clamping pressure between the two grips, which helps maintain alignment and reduces the tendency for the hardware to loosen under repeated daily operation.
The Emtek Jasper glass shower door back to back pull uses one grip with #10-32 threads in the stem, which establishes a fine-thread engagement point for through-glass fastening. The mating grip has a 3/8 inch diameter hole in the stem, giving a consistent bore size for the specified 3/8 inch diameter bevel head screws to pass through and tie the assembly together. This defined thread size and hole diameter help fabricators and installers work to exact drilling sizes when preparing the glass. The pull is identified as a 12 inch Center to Center unit, so the distance between mounting holes is fixed, allowing hole layout to be dimensioned precisely on shop drawings. The Oil Rubbed Bronze finish is applied to the visible hardware surfaces, which keeps the mounted pull visually consistent with other bronze-finished components while the structural connection happens at the stems.
The Emtek Industrial Modern Jasper appliance pull is crafted for glass shower doors, so its layout and hardware interface suit frameless glass door applications.
The Emtek Jasper shower door pull fits glass door thickness between 1/4 inch - 1/2 inch only, which defines the acceptable glass range for a proper clamping fit.
The Emtek 12 inch appliance pull has 12 inches between mounting hole centers, guiding where glass holes must be drilled for accurate alignment.
The Emtek Jasper back to back appliance pull positions one grip on each side of the glass, creating a push-pull pair for interior and exterior use.
This Emtek Jasper pull uses #10-32 threads in one stem, which provides a fine-thread connection point for the bevel head screws in the assembly.
The Oil Rubbed Bronze finish on the Jasper pull matches dark bronze tones, helping coordinate the shower door hardware with similar bathroom fixtures.
The Emtek Industrial Modern Jasper appliance pull, in Oil Rubbed Bronze and 12 inch Center to Center sizing, gives glass-focused shops and installers a defined solution for shower doors within the 1/4 inch - 1/2 inch thickness range. Its back to back appliance pull configuration delivers a grip on both sides of the door, so users get solid leverage whether entering or exiting the shower. With clearly stated thread, hole, and thickness details, this pull supports precise layouts and drilling on glass projects that call for Emtek styling. For glass shower door work that specifies the GBTB86693US10B part, this Jasper pull provides the defined dimensions and finish needed to keep the door hardware consistent with the overall bathroom design.