Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Transitional Heritage Westwood appliance pull is designed as a glass shower door back to back pull, so it serves both sides of the door with a consistent look. This 12 inch Center to Center layout spaces the mounting points for a full hand grip, which supports comfortable operation on heavier glass doors. The Oil Rubbed Bronze finish provides a dark, refined appearance that coordinates with many bath fittings, giving projects a unified visual line. Emtek branding and the Transitional Heritage Westwood design tie the pull to a known decorative hardware family, which helps match this piece with other Emtek components on the same project. The product is identified by manufacturer part number GBTB86912US10B, which helps installers and builders specify the exact pull required across drawings, orders, and field work.
The Emtek Transitional Heritage Westwood appliance pull is specified for glass door thickness between 1/4 inch and 1/2 inch only, which defines where the hardware seats correctly on the panel. This thickness range keeps the back to back pulls clamping properly on the glass, supporting consistent operation without overextending the threaded connection. The product is described as a glass shower door back to back pull, so its geometry and mounting are oriented around typical shower glass sizes rather than wood or metal doors. With a 12 inch Center to Center dimension, the pull spans a meaningful portion of the door height, which helps distribute hand force and provides a predictable reach point along the glass edge.
The Emtek Westwood glass shower door pull is specified for glass shower doors, so it fits projects where a door-sized handle is preferred over small cabinet hardware. The back to back configuration places a Transitional Heritage Westwood grip on each side of the glass, which benefits shared baths where users enter and exit from either direction. The 12 inch Center to Center span gives the pull a tall profile on the door, helping users find a stable grasp along the glass edge, even with wet hands. Its Oil Rubbed Bronze finish allows this hardware to align visually with bronze-toned fittings, bringing the shower door into the same finish palette as nearby faucets and trim. Emtek branding and the GBTB86912US10B identifier anchor this pull within Emtek decorative hardware offerings, which matters when architects and designers call out specific product lines for continuity. By focusing on glass shower door use, this pull serves bathroom projects that require a substantial, coordinated handle on frameless or semi-frameless glass.
The 12 inch Center to Center measurement on this back to back appliance pull defines the hole spacing through the glass, which supports repeatable drilling layouts across multiple doors on a job. The product description as a back to back glass shower door pull indicates that the two opposing grips align through the same holes, helping the assembly clamp securely around glass within the specified 1/4 inch to 1/2 inch thickness range. Limiting the application to that thickness band helps the pull seat correctly, so the grips bear against the glass surfaces as intended. The Oil Rubbed Bronze finish is part of the specification, giving installers and specifiers a clear cue when matching this pull to hinges and other visible components. Using the manufacturer part number GBTB86912US10B in plans and orders connects field installation directly to this exact Emtek Transitional Heritage Westwood model, which supports consistent hardware selection across all shower doors in the same project.
The Emtek GBTB86912US10B pull is described as a glass shower door back to back appliance pull, so it is intended for use on glass shower doors.
The Emtek Transitional Heritage Westwood appliance pull fits glass door thickness between 1/4 inch and 1/2 inch, so it targets common shower glass ranges.
The Emtek Transitional Heritage Westwood appliance pull has a 12 inch Center to Center measurement, setting the distance between the glass mounting holes.
The Emtek Transitional Heritage Westwood glass shower door pull is finished in Oil Rubbed Bronze, aligning it with bronze-toned bath and shower hardware.
The Emtek Transitional Heritage Westwood appliance pull is described as a back to back appliance pull, so it provides gripping points on both sides of the glass door.
This Emtek Transitional Heritage Westwood glass shower door back to back pull is identified by manufacturer part number GBTB86912US10B for specification and ordering.
The Emtek Transitional Heritage Westwood appliance pull brings a 12 inch Center to Center layout, Oil Rubbed Bronze finish, and back to back glass shower door configuration to bath projects that call for substantial, coordinated pulls. Its specified fit for glass door thickness between 1/4 inch and 1/2 inch targets common shower enclosures, helping designers and installers align hardware selection with known glass sizes. With a clear product identity and manufacturer part number GBTB86912US10B, this Emtek pull offers a defined option when a glass shower door handle must match a Transitional Heritage Westwood aesthetic.