Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Transitional Heritage Westwood appliance pull delivers a back to back grip on glass shower doors, so installers get a solid handling point on both sides of the glass for smoother door operation in daily use. The 18 inch Center to Center layout spans a larger portion of the door, which spreads hand contact over a longer area and helps users control heavier glass panels more comfortably. This pull is crafted for glass shower doors, aligning its construction with typical shower applications so it integrates cleanly into bathroom layouts. The Polished Nickel finish presents a refined, metallic surface that works with many bathroom styles, which helps maintain a coordinated look when matching other Polished Nickel fittings on the job.
This Emtek Transitional Heritage Westwood appliance pull fits glass door thickness between 1/4 inch and 1/2 inch only, which defines the range of shower glass panels that can be drilled and clamped correctly with this hardware. Working inside that 1/4 inch to 1/2 inch range helps the mounting stems and mating parts engage properly through the glass, supporting a tight, stable connection without overextending the threaded sections. The back to back configuration uses a grip on each side of the glass, so the door can be handled comfortably whether the user is entering or exiting the shower.
The Emtek Transitional Heritage Westwood appliance pull is crafted for glass shower doors, so its layout and hardware interface are focused on through-glass mounting rather than surface mounting to wood or metal. The back to back appliance pull design uses one grip with #10-32 threads in the stem paired to a mating grip with a 3/8 inch diameter hole in the stem, which means the two sides draw together through the glass to create a clamping effect. This arrangement gives the installer a defined path for drilling and aligning stems, so the pair stays square to the door plane once tightened. The stated 18 inch Center to Center measurement sets a fixed distance between the top and bottom mounting points, helping the pull sit proportionally on taller shower doors for a balanced look and comfortable reach. Because the pull is identified specifically as a glass shower door back to back appliance pull, it is oriented toward installations where the door panel is transparent glass rather than a framed or solid substrate.
The threaded stem on one grip using #10-32 threads, combined with the 3/8 inch diameter hole in the mating grip stem, defines a clear pairing between the two sides, which helps the installer keep components matched correctly during assembly. The use of 3/8 inch diameter bevel head screws with #10-32 threads in lengths of 3/4 inch and 7/8 inch gives two specific engagement options, allowing the mounting stack to be tuned to glass door thickness between 1/4 inch and 1/2 inch within the stated range. Those threaded connections work together with the specified glass thickness band to draw the grips snugly against the glass faces, supporting a firm feel when the door is pulled. The Polished Nickel finish across the appliance pull provides a unified surface appearance on both the inside and outside grips, which keeps the installation visually consistent for the user each time the shower is used.
The Emtek Transitional Heritage Westwood appliance pull is crafted for glass shower doors, so it is intended to serve as the main gripping point on a glass shower panel.
This pull fits glass door thickness between 1/4 inch and 1/2 inch only, so shower glass panels within that range can be clamped correctly between the two grips.
The appliance pull provides an 18 inch Center to Center spacing, setting the hole locations on the glass and helping the handle span a useful portion of the shower door.
The back to back design uses one grip with #10-32 threaded stem joined to a mating grip, so both sides clamp through the glass and provide pulls inside and outside the shower.
This Emtek glass shower door pull is finished in Polished Nickel, which presents a reflective metallic surface that coordinates with other Polished Nickel bathroom fittings.
This specific Transitional Heritage Westwood back to back appliance pull is identified by manufacturer part number GBTB86913US14, which ties directly to its size and Polished Nickel finish.
The Emtek Transitional Heritage Westwood appliance pull, part number GBTB86913US14, matches projects needing an 18 inch Center to Center back to back handle on glass shower doors with thickness between 1/4 inch and 1/2 inch. Its Polished Nickel finish supports coordinated bathroom layouts where other fixtures share the same tone, while the through-glass clamping design provides a solid gripping surface on both sides of the panel. When the job calls for a defined glass thickness range and a known Center to Center dimension in a Polished Nickel look, this pull aligns directly with those requirements.