Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Emtek Urban Modern Freestone appliance pull is crafted specifically for glass shower doors, so installers get a purpose-built handle for this application. The 18 inch Center to Center dimension sets consistent spacing between mounting points, which simplifies layout on new glass and keeps multiple doors visually aligned across a bathroom project. This piece functions as a back to back appliance pull, giving a grip on each side of the glass for steady operation from either direction. The Satin Nickel finish provides a refined appearance that matches many bathroom trim selections, helping hardware blend with existing faucets and fittings. As part of Emtek decorative hardware, this pull fits into higher end residential or light commercial bath work where appearance and function both matter.
The Emtek Urban Modern Freestone appliance pull uses an 18 inch Center to Center layout, so glass fabricators and installers can plan hole locations before tempering and count on a known spread during install. This pull fits glass door thickness between 1/4 inch and 1/2 inch only, which defines the acceptable panel range during specification and prevents guesswork with oversized or undersized glass. The product uses #10-32 threaded engagement between the grips and fasteners, providing a standard fine-thread interface that allows controlled tightening on the glass surface. A set of gaskets is part of the design, giving a protective layer between metal and glass so clamping forces are spread more evenly on the panel.
The Emtek Urban Modern Freestone appliance pull is intended for glass shower doors, so it suits new shower enclosures or remodels where glass panels fall between 1/4 inch and 1/2 inch in thickness. The 18 inch Center to Center size creates a substantial vertical gripping area that works well on taller doors, giving users multiple hand positions for better leverage. Because the pull is a back to back configuration, it serves both the inside and outside of the shower with one aligned set of through-glass holes, which keeps hardware locations consistent on framed or frameless style doors. The Satin Nickel finish lets the pull blend into projects that already specify satin nickel bath fittings, supporting cohesive design when matching hinges, valves, or towel bars selected in similar finishes.
The Emtek glass shower door back to back pull uses a clearly defined 18 inch Center to Center spacing, so glaziers and installers can set up drilling templates and repeat hole placement across multiple doors, sidelites, or replacement panels without reworking measurements. The use of #10-32 threads in the stem connects to bevel head screws of matching thread, which allows installers to snug the hardware consistently and fine-tune clamping pressure on the glass. The specified fit for glass door thickness between 1/4 inch and 1/2 inch provides a tight working window, helping specifiers match glass stock to the hardware capability during planning. Gaskets used in the assembly put a non-metal surface against the glass, spreading contact and helping the door handle daily pull forces without point loading at the fastener interface. The Satin Nickel finish gives a stable visual reference when aligning this pull with other satin nickel hardware in the bathroom, so installers can use the finish to coordinate hardware lines across the project.
The Emtek Urban Modern Freestone appliance pull is designed for glass shower doors, so it matches typical enclosure layouts where users need a solid grip on both sides.
The pull has an 18 inch Center to Center measurement, giving installers a fixed hole spread for drilling glass and aligning multiple doors with the same layout.
This Emtek pull fits glass door thickness between 1/4 inch and 1/2 inch only, so it is matched to common shower panel sizes used in many enclosures.
The pull uses a Satin Nickel finish, which coordinates with many satin nickel bath fixtures and creates a consistent metallic tone across the room.
One grip has #10-32 threads in the stem and the mating grip has a 3/8 inch diameter hole, so they are drawn together using #10-32 bevel head screws through the glass.
The gaskets sit between the pull hardware and the glass, helping distribute clamping pressure and placing a protective layer at the contact surface.
The Emtek Urban Modern Freestone appliance pull, model GBTB87002US15, combines an 18 inch Center to Center layout with a back to back configuration tailored for glass shower doors. The specified fit for 1/4 inch to 1/2 inch thick glass and the Satin Nickel finish give installers and designers a clearly defined hardware choice when planning enclosure openings. For projects needing a coordinated, glass-ready handle with known thread details and thickness limits, this pull provides a focused solution for shower door work.