Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune HES3D concealed 3-way hinge provides an invisible hinge solution that recesses into the door and frame, which keeps the hinge out of sight while the door operates normally in high-finish woodworking or cabinet projects. The hinge design is classified as an invisible hinge, so it sits within the material rather than on the surface, which maintains clean lines on both the door face and the frame edge in visible installations. A 15/16 inch minimum door thickness rating means the hinge is engineered for relatively thick doors, which suits heavier or solid cabinet and architectural panels where thinner hinges are not appropriate. The hinge offers 3-way adjustment, giving fine-tuning of alignment after mounting, which supports precise reveals and reduced rework during final fit. The hinge leaves separate for easy installation and removal, so the door can be taken off or rehung without disturbing the mortised components, which helps during finishing, transport, or later service.
The Sugatsune HES3D concealed 3-way hinge provides 3-way adjustment, which allows fine-tuning in three directions after the hinge is mounted, helping align door gaps and flushness without redrilling hinge locations. The hinge leaves separate for easy installation and removable door handling, so the recessed body can be set into the door and frame while the removable portion carries the door, which simplifies handling of larger or heavier doors in the shop or on site. A 15/16 inch minimum door thickness specification signals that the mortise depth and screw engagement are sized for thicker door constructions, which supports stronger anchoring in substantial cabinet or architectural doors. As an invisible hinge within the Invisible and Recessed Hinges category, it is intended to sit fully within cutouts, supporting a streamlined finished look that does not require external hinge trim.
The Sugatsune HES3D concealed 3-way hinge falls under Invisible and Recessed Hinges, so it suits projects where the hinge body is meant to disappear into the door and frame, such as premium cabinetry or architectural panels. Its 15/16 inch minimum door thickness specification targets doors with enough substance to accept a recessed pocket, which supports use on thicker cabinet doors, closet doors, or panel doors that match this build. The hinge leaves separate for easy installation and removal, which supports workflows where doors are hung late in the project after finishing, allowing finish work on door slabs without the weight of the frame. Because cover caps hide all screw heads, the hinge maintains a clean interior view when the door is open, which fits applications where interior aesthetics matter as much as the exterior. The hinge operates as a concealed unit, so nothing projects from the edge, supporting tight reveals and a modern, uninterrupted appearance.
The 3-way adjustable hinge function allows adjustments after installation, which helps correct minor drilling or mortising variances so doors can be aligned without reworking the pockets. This is especially helpful on thicker 15/16 inch or greater doors, where altering mortises after the fact can be labor-intensive, because material removal affects both structure and finish. The removable hinge leaves support staged workflows, where one side of the hinge can be set into the cabinet or jamb and the other into the door, then brought together at the end, which reduces handling damage on finished surfaces. The use of cover caps to hide all screw heads means that once adjustments are dialed in, the appearance around the hinge remains clean, which is important for projects where clients expect concealed hardware even when doors are open. The dull nickel finish provides a subdued metallic look on visible portions of the hinge, which keeps reflections low inside cabinets or openings while still presenting a finished metal surface. With manufacturer part number HES3D-90DN clearly specified, shops can repeat the same hinge across multiple openings, supporting consistent performance, mortise dimensions, and adjustment behavior from job to job.
The HES3D-90DN is a Sugatsune HES3D concealed 3-way hinge classified as an invisible hinge, which recesses into the door and frame for a hidden installation in cabinetry or similar projects.
The Sugatsune HES3D concealed 3-way hinge is specified for a 15/16 inch minimum door thickness, which suits thicker cabinet or architectural doors that can accept a recessed hinge pocket.
The 3-way adjustable hinge design lets installers fine-tune door position after mounting, which supports accurate reveals and alignment without remaking mortises or changing hinge locations.
The HES3D-90DN hinge leaves separate for easy installation and removal, allowing the door to be lifted off the mounted hinge bodies, which simplifies finishing, transport, or later service work.
Cover caps on the Sugatsune HES3D hinge hide all screw heads, which leaves a clean, uncluttered look around the hinge area when doors are open on finished cabinetry or panel work.
The HES3D-90DN hinge has a dull nickel finish, which provides a muted metallic appearance on exposed portions of the hinge, complementing many interior hardware and cabinet color schemes.
The Sugatsune HES3D concealed 3-way hinge in dull nickel combines invisible hinge construction with 3-way adjustability, giving installers a concealed hardware option that can be fine-tuned on site. Its 15/16 inch minimum door thickness rating aligns with thicker doors used in many cabinet and architectural applications, so hinge pockets and screw engagement match substantial door builds. With hinge leaves that separate for easy installation and removal, along with cover caps that hide screw heads, this HES3D-90DN hinge supports both workflow efficiency and a clean finished look. For projects that call for a recessed hinge solution from Sugatsune America, this hinge offers a defined specification and adjustment capability that supports repeatable, professional results.
Sold In: 1 Each
