Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
White birch fleece back edgeband from Veneer Technologies finishes exposed panel edges with a matching wood look, so cabinets and casework present a uniform face instead of raw substrate. The 7/8 inch width covers standard panel thickness with a bit of overhang, giving room to trim flush without exposing core material. The fleece back construction supports adhesive bond along the full length, helping the strip stay seated under normal shop conditions. With the WBIR78-500 part designation, this edgeband ties directly to Veneer Technologies ordering and reordering, which helps keep jobs consistent across multiple runs. When sourced through Wurth Baer Supply, this edgeband drops directly into woodworking workflows that already rely on dedicated cabinet hardware and wood products.
The 7/8 inch white birch fleece back edgeband spans slightly beyond standard panel thickness, letting installers align the strip while leaving enough margin to trim flush after bonding. This extra width supports clean corners and consistent reveals on cabinet carcasses and shelving. The fleece back gives the adhesive a textured surface to grab, which helps the band conform along straight runs and gentle transitions without lifting. Because the face is white birch, the applied edge visually ties into matching white birch surfaces, strengthening the impression of a solid-wood build around exposed edges.
This white birch fleece back edgeband suits woodworking projects that expose sheet-good edges, such as cabinet sides, shelving, and general casework built from white birch-faced stock. The 7/8 inch width lets installers cover typical furniture and cabinet panels while leaving usable trimming margin, which is useful when edging vertical sides, tops, and bottoms that need a consistent reveal. Because Veneer Technologies produces this white birch face, shops standardizing on that appearance can run it across multiple panel layouts and maintain the same visual across edges. Within Wurth Baer Supply assortments, it aligns naturally with wood products work where a white birch edge is specified.
The fleece back design supports steady adhesive contact, which helps the band track straight along the length of a panel and reduces the tendency for localized gaps. The 7/8 inch width gives an installer both alignment forgiveness and trimming allowance, so slight placement variation can still be trimmed back to a crisp edge without exposing the core. Using the WBIR78-500 part number keeps purchasing consistent, so a shop can repeat a proven setup across runs without chasing visual differences between batches. The white birch face lets finished edges tie directly into white birch panels, which simplifies layout decisions when aligning grain direction on cabinet fronts and visible carcass sides.
The white birch fleece back edgeband is for finishing exposed panel edges, turning visible substrate into a continuous white birch surface on cabinets and casework.
The WBIR78-500 edgeband is 7/8 inch wide, giving coverage past typical panel thickness and leaving margin for trimming to a clean, flush edge.
The fleece back provides a receptive surface for adhesive, helping the edgeband bond along its length and stay seated during normal woodworking use.
A white birch edgeband matches white birch-faced sheet goods, so the edge and face present a unified wood appearance on cabinets and shelving.
The 7/8 inch width creates overhang on both sides of typical panels, so installers can trim back to a precise line without exposing core material.
WBIR78-500 is the Veneer Technologies manufacturer part number, helping shops reorder the same white birch fleece back edgeband for consistent project results.
The white birch fleece back edgeband from Veneer Technologies pairs a 7/8 inch width with a white birch face to finish exposed edges so they visually align with matching panels. Using the WBIR78-500 part through Wurth Baer Supply integrates easily into woodworking jobs already drawing from their cabinet hardware and wood products range. For shops working regularly with white birch-faced material, this edgeband supports repeatable edges that present as a continuous white birch surface from face to edge.
Sold In: 1 Roll