Omega National AG-100 Series Hickory Appliance Garages 24"W x 11-7/8"D, Solid Wood, AG-100SSH-24

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPAG-100SSH-24 to RSAG-100SSH-24.

Omega National Hickory Appliance Garage For Cabinets

Omega National AG-100 Series Hickory appliance garage gives a cabinet run a defined space for small appliances, so the work surface stays clearer during kitchen projects. The 24 inch width creates a compact storage bay that fits typical countertop cabinet sections for targeted coverage instead of spanning a full wall. The 11-7/8 inch depth matches common upper cabinet depths, so the unit aligns with standard kitchen layouts without pushing out past the face of surrounding cabinetry. Solid wood construction in hickory provides a uniform material for fabricators building or modifying cabinets from hickory components, which helps keep color and grain transitions consistent across a run. The AG-100SSH-24 part number clearly identifies this 24 inch wide, hickory, solid wood version within the AG-100 Series, so repeat orders and specification notes stay traceable on drawings and material lists.

Key Details That Support Cabinet Layout Work

• The 24 inch width creates a defined appliance bay that nests between cabinet sides, which helps designers allocate specific countertop space for devices without reworking an entire wall of cabinets.
• The 11-7/8 inch depth tracks with standard wall cabinet depths, allowing the appliance garage to sit flush in typical kitchen layouts and reducing alignment adjustments when tying into adjacent cabinet boxes.
• Solid wood construction gives woodworkers a material they can cut, shape, or edge to match surrounding cabinetry techniques, which keeps joinery and exposed edges consistent with the rest of the project.
• Hickory material aligns this unit with hickory cabinet runs, so door and face-grain appearance stays in the same species family when the garage is integrated into a hickory kitchen design.
• The Omega National AG-100 Series designation identifies this garage as part of a defined product family, helping shops reference it reliably in project specifications or ordering systems.

Appliance Garage Fit Within Cabinet Runs

The AG-100SSH-24 hickory appliance garage uses a 24 inch width that fits within many standard cabinet-module planning grids, which simplifies selecting a cabinet box size to carry the opening. With an 11-7/8 inch depth, the garage aligns with typical upper cabinet depths, so the face of the unit can line up with adjacent cabinet faces in a run. Being part of the Appliance Garages & Tambour Doors product class positions this unit for use where a retracting front is needed over a counter zone, so small appliances occupy cabinet-depth space instead of protruding into walkways. The defined dimensions let builders mark out the opening during cabinet fabrication, so the appliance bay is accounted for before assembly rather than being adapted later.

Using This Hickory Appliance Garage In Kitchen Projects

Where This AG-100 Series Garage Fits Best

This Omega National AG-100 Series Hickory appliance garage is specified for kitchen and bath cabinet work through its placement in the Kitchen & Bath Cabinet Accessories category, so it suits projects focused on built-in storage near work surfaces. The 24 inch wide format works well at the end of a run or between upper cabinets where a single appliance station is needed, concentrating toasters or similar equipment into a predictable footprint. Its 11-7/8 inch depth follows common upper cabinet dimensions, which keeps the unit within the same front-to-back envelope as adjacent fixtures. Solid wood hickory construction lets the garage integrate visually with hickory cabinets, giving designers a consistent material choice for fronts and trim in that zone.

Details That Support Repeatable Cabinet Results

The Omega National solid wood construction provides a familiar substrate for cutting and machining operations, so fabricators can work this appliance garage with the same tooling routines used on other hickory cabinet parts. Because the AG-100SSH-24 part number ties directly to a 24 inch wide, hickory, AG-100 Series garage, project documentation can call out this exact unit, reducing confusion between different species or sizes in the same family. Location in the Appliance Garages & Tambour Doors product class signals that this unit is intended for use where a retracting front is planned, so cabinet designs can reserve appropriate vertical opening height and interior depth ahead of time. As part of the Kitchen & Bath Cabinet Accessories group, this garage fits into broader layouts that rely on defined accessory components, which helps shops standardize appliance stations across multiple jobs.

Common Questions About The AG-100SSH-24 Garage

Selecting This Hickory Appliance Garage For Your Build

The Omega National AG-100 Series Hickory appliance garage AG-100SSH-24 combines a 24 inch width, 11-7/8 inch depth, and solid wood hickory construction for projects using hickory cabinets in kitchen or bath spaces. Its classification within Kitchen & Bath Cabinet Accessories and Appliance Garages & Tambour Doors defines it as a dedicated component for appliance storage zones above counters. Using this specific AG-100SSH-24 part in drawings and job files helps align design intent, cut lists, and ordering for repeatable cabinet runs.