NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPFSC8136EUF1 to RSFSC8136EUF1.
Omega National curved floating shelf delivers a 36 inch wide by 10 inch deep storage surface with a subtly curved 8-1/2 inch radius edge, so it works as both usable shelf space and a clean decorative element on the wall. Solid wood and wood veneer construction, with paint-grade shelves made from poplar and MDF, creates a stable structure that supports everyday loads while giving fabricators a familiar material to work with during finishing. The design uses a concealed hanging system, so there is no visible hardware and the installed shelf presents a true floating effect that suits modern residential or light commercial spaces. The product sits in Omega National Products floating shelves and concealed brackets class, which positions it as a component where the shelf and hidden support system work together in one coordinated solution for wall-mounted storage runs.
The curved 36 inch walnut floating shelf uses a unique hanging system paired with 100 lb capacity hanging brackets, so the assembly transfers load back to the structure while presenting a clean floating profile on the finished wall. The hanging system is designed for quick installation, which helps installers move efficiently through multi-shelf runs or repetitive layouts in closets and garages. No visible hardware at the face or underside means alignment work focuses on level and spacing rather than hiding fasteners, which simplifies layout decisions around surrounding cabinets or trim. Sanded and ready to finish surfaces let trades choose stains or paints at the job stage, integrating the shelf into existing millwork or new casework in one controlled finishing step.
The 36 inch by 10 inch walnut curved floating shelf fits wall layouts needing a moderate span with a slim projection, such as over casework, in closet runs, or on open feature walls. Its position in the Shelf, Closet & Garage Organization category points it toward storage and display roles in closets, garages, and general organization zones. The subtly curved 8-1/2 inch radius front edge reads well at eye level, so the shelf works effectively as a stand-alone design feature or as a repeating module in a series. Solid wood and wood veneer construction, combined with a standard 10 inch depth, supports typical items in living and storage spaces while staying proportionally balanced on standard-height walls.
The complete turn-key system with floating shelf, 100 lb capacity hanging brackets, mounting hardware, and installation instructions creates a coordinated approach where every component is matched to the Omega National shelf body for strength and alignment. The unique hanging system is built for quick installation, so trades can set bracket positions, slide the shelf onto the concealed support, and move to the next location with minimal rework. No visible hardware contributes to a seamless floating effect, which allows designers to run multiple shelves without visual clutter from brackets or angle irons. Meeting or exceeding BHMA standards for safety and strength means the installed shelf responds predictably under rated loading, which supports repeatable layouts across multiple rooms or units. Being sanded and ready to finish allows the installer or finisher to apply stain, clear coat, or paint on site, tailoring the walnut look or paint-grade surfaces to match adjacent doors, trim, or casework.
The Omega National 36 inch x 10 inch D curved floating shelf provides a 36 inch span and 10 inch depth, giving a balanced footprint for storage or display along standard wall sections.
The curved floating shelf uses a unique hanging system with 100 lb capacity brackets, so installers can set brackets once, mount the shelf, and repeat the process quickly across multiple locations.
The 100 lb capacity hanging brackets are matched to the shelf, so when properly anchored they support typical loads used in closet, garage, or display applications on this 36 inch span.
The floating shelf meets or exceeds BHMA standards for safety and strength, so the installed system reflects recognized performance criteria important in repeat commercial or residential layouts.
The shelf is sanded and ready to finish, so finishers can move straight to staining or painting, aligning color and sheen with nearby millwork in one controlled process.
The subtly curved 8-1/2 inch radius edge softens the front profile, so designers can add visual interest and a modern look without altering the basic wall layout or shelf spacing.
The Omega National curved floating shelf in walnut pairs a 36 inch by 10 inch format with a concealed hanging system, so it supports 100 lb capacity brackets while presenting a clean floating face on the wall. Solid wood and wood veneer construction, combined with sanded and ready to finish surfaces, lets shops and installers integrate the shelf into established stain or paint systems. When a project calls for a modern floating look, defined by a subtly curved 8-1/2 inch radius edge and no visible hardware, this FSC8136EUF1 shelf offers a straightforward way to build consistent, BHMA-rated storage and display runs.
Sold In: 1 Each