Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National Estate Series hood is a 30-inch-wide decorative wood shell in rift white oak, wall-mounted above the range and sized to accept a Broan-compatible ventilation insert through the included liner.
Rift-sawn white oak reads differently on a hood face than flat-sawn material. The grain lines run straight and tight, with minimal ray fleck visible at typical viewing distances, so the surface takes stain evenly and holds a consistent color across the width. That predictability matters on a wide panel installed at eye level in the kitchen. This hood shell brings that material advantage to the cooking wall without requiring a custom millwork order, and the Estate Series canopy profile fits comfortably alongside raised-panel, shaker, and transitional door styles.
This product is the decorative enclosure. It does not move air, and it does not include a blower, motor, or grease filter. The Broan-compatible liner is included and mounts inside the shell to seat the ventilation insert. The ventilator itself is chosen separately based on the cooktop output and duct configuration of the installation. That separation lets the ventilation be specified to the actual cooking load while the wood shell handles the aesthetic work above it.
Cabinet shops finishing a transitional or traditional kitchen where white oak is already the cabinet species will find this shell the most direct path to a matched hood. Designers specifying a wall-mount canopy on a cooking wall with limited depth will note the 6-7/8-inch projection. Contractors installing the unit should plan to finish the shell on-site to match the surrounding cabinets before the ventilator goes in. Because the surface is ready-to-finish, the finishing schedule follows the rest of the cabinetry rather than arriving pre-coated in a color that may not match.
No. This is the decorative wood shell and the Broan-compatible liner. The ventilator that moves air is a separate purchase, selected to match the cooktop and duct setup.
No. The shell is supplied ready-to-finish so it can be stained or painted on-site to coordinate with the surrounding cabinetry.
Rift-sawn material is cut at an angle to the growth rings, which produces a straighter, more uniform grain pattern with less ray fleck than flat-sawn white oak. The result is a consistent surface that takes stain evenly across the panel.
The included liner fits inside the wood shell and provides the metal housing that a compatible Broan ventilation unit mounts into. The wood shell, liner, and ventilator together form the complete hood installation.
When the kitchen is built in white oak and the hood needs to match, this Estate Series shell in rift white oak brings the same species and grain character to the cooking wall, ready to be finished alongside the cabinets.
Sold In: 1 Each