Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National Estate Series canopy range hood is a 42-inch wide decorative wood shell in rift white oak, wall-mounted and supplied with a Broan-compatible liner so the ventilation side of the install has a clear path forward.
The Estate Series canopy profile suits a kitchen that centers on the range as a focal point. At 42 inches wide, the shell spans a standard 36-inch range or cooktop with room to spare on each side, which is the proportional relationship most designers and builders target for a hood that reads as intentional rather than minimal. The wall-mount configuration keeps the installation straightforward: it anchors to the wall above the cooking surface and integrates with the upper cabinet run on either side. Because the shell is a decorative enclosure rather than a mechanical unit, the ventilation insert does the actual air-moving work and is chosen to match the cooktop output and the kitchen's duct or ductless setup.
Rift-sawn white oak produces a tighter, more vertical grain than flat-sawn cuts, so the face of the hood shows a uniform linear pattern rather than the cathedral figure that appears in plain-sawn lumber. That consistency makes it easier to stain evenly and helps the finished hood read as an extension of the cabinetry rather than a competing element. Because the shell arrives unfinished, it can be stained, glazed, or painted on-site to match the cabinet doors exactly, without having to accommodate a factory color that is close but not quite right. For shops finishing in a spray booth, this is the natural choice over a prefinished shell.
Cabinet shops building a custom kitchen with white oak or complementary species will use this shell to extend the wood program through the hood. Designers specifying a transitional or contemporary kitchen get the linear grain of rift white oak without locking into a factory finish. Contractors coordinating the millwork and the appliance package benefit from the included Broan-compatible liner, which removes one compatibility decision from the field. The ventilator itself, selected separately to match the cooktop BTU load and the duct configuration, drops into the liner once the shell is installed and finished.
No. This is the decorative wood shell and liner. The liner is compatible with Broan ventilation, and the ventilator that actually moves air is selected and purchased separately to suit the cooktop and duct setup.
The liner fits inside the wood shell and provides the housing for a compatible Broan ventilation insert. Having it included means the shell and liner arrive together and the ventilator can be ordered to match without guessing at liner dimensions.
No. Rift-sawn oak is cut at a different angle than plain-sawn, which produces a tighter, more vertical grain and less of the pronounced cathedral figure associated with flat-sawn boards. The result is a more uniform face grain that stains evenly.
Yes. The shell arrives unfinished and ready to finish, so it can receive paint, stain, or a custom finishing system applied in the shop or on-site.
Choose this shell when the kitchen calls for a 42-inch rift white oak canopy hood that can be finished to match the cabinetry exactly, with a Broan-compatible liner already in the box to simplify the ventilation spec.
Sold In: 1 Each