Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2036SMB17UF1 to RSR2036SMB17UF1.
Signature Craftsman Straight Wall Hood 36 defines this Omega National wood range hood as a straight wall-mount unit that anchors a 36 inch cooking run in a kitchen layout. The rift white oak construction gives the hood a consistent, linear grain appearance, which supports a clean Craftsman style when paired with matching cabinet doors and trim. As a wood range hood from Omega National Products, this unit is designed as a finished cabinet component, so it can serve as the visual focal point over the cooktop while aligning with other woodwork. The 36 inch width places the hood at a common size for standard base cabinet and range configurations, which helps layout planning in new installs or cabinet upgrades. The Signature Craftsman identity signals a straight, wall-focused profile that works in projects calling for a simple, framed look rather than a deep mantel or chimney form.
This Omega National 36 W rift white oak hood is classified as a straight wall mount range hood, so it is intended to be installed directly against a wall above the cooking surface. The 36 inch sizing lets cabinet runs be designed with adjacent wall cabinets on each side while keeping the hood centered over a similarly sized appliance. Being part of the wood range hoods category, it is meant to integrate with wood cabinetry rather than stand alone as metal equipment, which supports cohesive face-frame or frameless layouts. The Signature Craftsman designation indicates a straightforward profile that aligns easily with flat-panel or simple mission-style door designs. As a wall hood from Omega National Products, it is suited to projects where the duct and ventilation path are planned through the wall or upward through cabinets behind a wood structure.
This Omega National wood range hood is identified as a Signature Craftsman Straight Wall Hood 36, positioning it for cooking zones built along a wall rather than islands. The 36 inch width gives designers a clear dimension when laying out base cabinets, allowing a same-width range or cooktop to sit directly beneath the hood for visual alignment. Because it is described as a rift white oak Signature Craftsman wall mount range hood, it brings a defined material and style to that location, letting shops coordinate door styles, face frames, and trim details around the same species and aesthetic. As part of the wood range hoods product class, it functions as both a ventilation structure and a cabinet-grade element in the elevation, so it can be integrated into custom hoods, valances, and stacked cabinets without breaking the wood run. The straight wall hood form factors into projects where the hood is framed between wall cabinets, giving installers clean vertical and horizontal reference lines for setting heights, scribes, and transitions to adjacent units.
The web description specifies this as a Signature Craftsman straight wall mount range hood with a Broan compatible liner, identifying that the interior liner is configured to interface with Broan ventilation components. That compatibility lets project planners design the venting system around recognized Broan setups while using the rift white oak exterior as the visible cabinet element. In practice, the liner compatibility simplifies coordination between the wood hood shell and the mechanical vent insert, helping fabricators align cutouts and internal clearances to the Broan format. The SAP description reference to a range hood with a liner at 36 inches supports that this wood structure is intended to work as the outer housing over the liner, so the wood hood defines the finished look while the liner defines the metal and vent side. This pairing allows kitchens to maintain a unified wood appearance in the hood zone while using a ventilation core that aligns with Broan-oriented plans.
The Signature Craftsman Straight Wall Hood 36 is identified as a 36 inch wide unit, which aligns with common range and cooktop widths for straightforward wall-run cabinet layouts.
This Omega National wood range hood is described as a straight wall mount range hood, so it is intended for mounting against a wall above the cooking surface in cabinet runs.
The hood is described as a rift white oak Signature Craftsman straight wall hood, combining a linear rift white oak grain with a Craftsman-oriented profile for coordinated cabinet designs.
The hood is specified with a Broan compatible liner, so project planning can center ventilation design around Broan components while the wood hood serves as the finished exterior shell.
This unit is listed in the wood range hoods product class, meaning it functions as a cabinet-grade wood structure around the vent zone rather than a standalone metal hood.
The specific 36 inch rift white oak Signature Craftsman Straight Wall Hood from Omega National Products is identified by manufacturer part number R2036SMB17UF1.
The Signature Craftsman wall mount range hood in 36 inch width from Omega National Products gives cabinet shops and installers a defined wood structure for wall cooking runs. The rift white oak species and Craftsman styling help projects that call for a clean, linear wood presence over the range while staying within the wood range hoods category. With a Broan compatible liner identified, this hood supports designs that rely on Broan ventilation components inside a wood shell. For 36 inch wall applications that need a coordinated wood hood and vent planning around Broan compatibility, this Signature Craftsman Straight Wall Hood 36 offers a targeted solution.
Sold In: 1 Each