Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2042SMB17UF1 to RSR2042SMB17UF1.
Signature Craftsman Straight Wall Hood 42 starts as a dedicated wood range hood solution for wall-mount kitchen layouts, so it defines a clear focal point over the cooking zone and sets the tone for the cabinet run. As a wood range hood from Omega National Products, it pairs naturally with wood cabinetry, which helps installers tie the hood into surrounding panels and moldings. The 42 inch width creates coverage for a standard cooktop area, giving designers room to balance proportions on wider ranges while keeping adjacent wall cabinets usable. The Rift White Oak material brings a linear grain character, which matters when aligning doors, drawer fronts, and panels for a consistent modern or Craftsman-style look. The Signature Craftsman straight wall design keeps the hood against the wall, so installers work with a predictable wall-mount geometry when laying out ducting and upper cabinets.
This Omega National Signature Craftsman straight wall mount range hood defines a wall-based installation path, so layout work centers on anchoring to the wall structure instead of a corner or island frame. With its 42 inch width, the hood gives a known dimension to center over the cooking appliance, which simplifies drawing cabinet elevations and locating stud backing before rough-in. The Rift White Oak material means the hood is intended to sit visually with other wood elements, so shops can sequence finishing and color-matching steps alongside doors and face frames. The defined product identity as a Signature Craftsman wall hood supports repeatable design details when the same style is used across multiple homes or units.
This Omega National 42 inch Rift White Oak Signature Craftsman straight wall mount range hood fits kitchens built around a wall-mounted cooking zone, because its straight wall design assumes a flat wall backdrop. As a wood range hood, it suits projects where the hood is treated as part of the cabinet system rather than a separate metal unit, which helps maintain a continuous wood look across the upper run. The Rift White Oak material makes the hood especially relevant in designs that already specify rift white oak doors, end panels, or floating shelves, so the hood can align visually with those elements. The Broan compatible liner reference in the description ties this hood to use with a liner matched to Broan systems, which directs the hood toward jobs where a Broan-oriented ventilation solution is planned.
The Signature Craftsman naming signals a consistent design language, so shops repeating this Omega National wood range hood across multiple projects can depend on a recognizable straight wall profile. The 42 inch width provides a fixed working dimension for cut sheets, which helps drafters, CNC programmers, and installers keep hood openings, fillers, and upper cabinet runs consistent from job to job. The Rift White Oak specification keeps material selection predictable, allowing finishing teams to build a finishing schedule around rift white oak tones and sheen across the entire kitchen. The Broan compatible liner detail gives installers a clear direction when pairing the hood structure with a liner suited to Broan-based ventilation, which helps coordinate trades when setting expectations between cabinet, electrical, and mechanical work scopes.
The R2042SMB17UF1 is an Omega National Signature Craftsman straight wall mount wood range hood, so it is intended for wall-mounted kitchen installations with a flat wall behind the cooking surface.
This Signature Craftsman straight wall hood is 42 inches wide, giving a defined span for centering over the range and coordinating adjacent cabinet sizing and filler pieces.
The hood is specified in Rift White Oak, providing a linear rift grain appearance that works with rift white oak doors, panels, and trim for a unified modern or Craftsman-style kitchen elevation.
This Omega National wood range hood is described as a straight wall mount design, so it is intended to mount against a wall rather than in an island or corner configuration.
The web description specifies a Broan compatible liner, indicating the hood is oriented toward use with a liner matched to Broan ventilation systems for the cooking area.
This hood is produced by Omega National Products, which helps designers and shops coordinate with other Omega National wood range hoods and reference the R2042SMB17UF1 part number accurately.
The Omega National Signature Craftsman straight wall mount range hood in 42 inch Rift White Oak gives cabinetmakers and installers a defined wood hood solution for wall-based cooking layouts. With its straight wall profile, 42 inch span, and rift white oak material, it supports projects that prioritize a continuous wood aesthetic over the range. When a Broan compatible liner is part of the plan, this R2042SMB17UF1 model ties the wood structure to that liner approach. For kitchens built around rift white oak cabinetry and a centered wall appliance, this hood provides a clearly specified focal point to pull the elevation together.
Sold In: 1 Each