NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR21B30SMB1OUF1 to RSR21B30SMB1OUF1.
Omega National 30 inch red oak range hood identifies this unit as a 30 inch wide wood range hood built from red oak, giving cabinet shops and installers a defined centerpiece size and species to coordinate with surrounding kitchen cabinetry. The Signature Straight Raised Panel design specifies a straight raised panel style, so millwork teams can align door profiles and panel details across the run for a consistent look. Being a wall hood means this unit is intended for wall mounting over a cooking surface, guiding layout for cabinet elevations and hood clearances on wall runs. The product class of wood range hoods confirms this is a wood-based decorative hood shell, suited to stained or painted finishes during the same finishing cycle as adjacent cabinets. The branded identity from Omega National Products signals a purpose-built cabinet-industry component that integrates into standard kitchen casework planning.
The wall mount range hood designation tells installers this Omega National unit is designed to fasten to a wall over the cooktop, so wall framing and cabinet cleats can be prepared to support the hood at the specified 30 inch width. Because the hood is categorized as a wood range hood, it can be integrated into standard cabinet runs, allowing trades to set reveal lines and crown transitions that match adjacent wall cabinets. The 30 inch width works with common 30 inch appliance and cabinet modules, simplifying centerline layout over a 30 inch range or cooktop bay. The red oak construction supports jobsite trimming and scribing typical of hardwood cabinetry, so fit adjustments can follow familiar cabinet installation practices. The Signature Straight Raised Panel styling also guides how surrounding cabinet doors and valances are arranged for visual alignment.
The Signature Straight Raised Panel wall hood is identified as a wood range hood for kitchen and bath cabinet environments, so it fits best in projects where a wood decorative hood is coordinated with surrounding casework. Its 30 inch width positions it above standard 30 inch cooking equipment or centered between 30 inch module cabinets, which helps designers maintain balanced proportions in smaller to mid-size wall runs. The red oak species aligns with red oak cabinet programs, making it suitable for kitchens that use red oak frames, doors, or moldings and rely on a unified grain and color base. As a wall mount range hood, it is specifically oriented to wall applications rather than island locations, so it suits layouts with a cooking zone placed on a perimeter wall. The Signature Straight Raised Panel profile supports traditional or transitional design schemes that use raised panel doors and matching profiles.
The specified 30 inch wide wall mount range hood dimension gives installers a clear target for rough-in spacing, so cabinet runs can be framed and hung with a dedicated 30 inch opening that accepts this Omega National hood without rework. The red oak construction lets finishing shops run the hood through the same stain and topcoat schedule as red oak cabinetry, supporting color continuity across doors, frames, and the hood structure. The Signature Straight Raised Panel description defines the panel geometry, enabling door vendors and millwork teams to choose raised panel doors and trim that visually align with the hood face for a coordinated elevation. Knowing the product class is wood range hoods indicates that this piece belongs in the same workflow as cabinet assembly and installation, so teams can plan handling, finishing, and mounting steps using standard cabinet hardware and practices. The branding as Omega National Products provides a clear manufacturer reference for aligning future design selections or coordinating with existing Omega National wood hood installations.
The R21B30SMB1OUF1 hood is a Signature Straight Raised Panel 30 inch wide wall wood range hood from Omega National Products, giving cabinet professionals a defined decorative hood structure for kitchen projects.
This Omega National wood range hood is 30 inches wide, which aligns with standard 30 inch cooking zones and cabinet modules for straightforward layout and centering above the range area.
This Signature Straight hood is made from red oak, so finishing operations can follow typical red oak cabinet finishing systems, supporting stain matching and coordinated grain appearance across the kitchen.
This Signature Straight unit is a wall mount range hood, so it is intended to mount on a wall over the cooking surface within a standard kitchen cabinet elevation.
The raised panel design establishes a Signature Straight Raised Panel profile that can be echoed in cabinet doors and panels, creating a unified traditional or transitional look across the installation.
This 30 inch red oak wall hood is manufactured by Omega National Products, giving designers and shops a consistent brand reference for matching other Omega National wood range hoods.
This Signature Straight Raised Panel 30 inch wide wall hood provides a defined Omega National wood range hood option for projects built around red oak cabinetry, helping designers lock in a hood style and size that tracks with standard 30 inch cooking layouts. The wall mount range hood identity means it aligns with perimeter wall cooking zones, while the red oak construction lets finishing and installation crews treat it as part of the overall cabinet system. When a project calls for a 30 inch wide red oak hood with a straight raised panel face, this model offers a clearly specified solution that integrates into kitchen and bath cabinet plans.
Sold In: 1 Each