Modern Tapered 30" Wide Wall Hood, Hickory, R29T030SMB1HUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR29T030SMB1HUF1 to RSR29T030SMB1HUF1.

Omega National Hickory Modern Taper Wall Range Hood

Omega National 30 inch Hickory Modern Taper Range Hood defines the cooking zone while matching wood cabinetry, so the hood reads as part of the cabinet run instead of a separate metal piece. The 30 inch width establishes a clear focal point over a standard-size range, which helps keep wall layouts balanced in small or mid-size kitchens. The modern tapered design creates clean visual lines, supporting contemporary or transitional cabinet styles without ornate detailing. Hickory construction brings a pronounced wood grain appearance, giving designers a way to tie in hickory doors, panels, or trim in one coordinated elevation. As a wall mount wood range hood, this piece is designed to sit on the wall above the cooking surface, so layout planning follows typical upper cabinet spacing. The hood belongs to the Omega National wood range hoods product class, which signals a purpose-built component for kitchen and bath cabinetry projects.

Key Details Of This Wood Wall Hood

• The 30 inch wide format matches a common range width, so the face of the hood aligns with many standard appliance layouts and helps maintain consistent cabinet proportions over the cooking area.
• The modern tapered profile shapes the hood with angled sides, which visually lightens the upper wall run and suits straightforward, flat-panel door programs where a simple geometry is preferred.
• Hickory construction provides a distinct wood character, allowing the hood to coordinate with hickory cabinet fronts or accents and keep grain and tone consistent across the kitchen design.
• The wall mount configuration places the hood directly on the wall above the range, which fits typical upper cabinet planning and keeps the cooking zone visually defined on straight wall runs.
• Being part of Omega National wood range hoods ties this model to a focused cabinet component line, giving designers a familiar reference point when matching other Omega National wood hood styles in a project.

Wall Mount Range Hood Fit And Layout Use

This Modern Tapered 30 inch Wide Wall Hood is specified as a wall mount range hood, so it is planned like a cabinet element fixed to the wall above the range opening. The 30 inch width supports layouts using a 30 inch cooking appliance, helping keep margins to nearby cabinets even. As a wood range hood, it visually connects to surrounding cabinet boxes and face frames, which simplifies decisions about door style and finish continuity. The modern taper shape avoids heavy ornamentation, so installers can position it between simple wall cabinets without needing additional decorative fillers. The hickory material lets the hood carry the same species as adjacent cabinet runs, which is useful when designing a continuous hickory wall elevation.

Using This Omega National Hood In Kitchen Projects

Where This 30 Inch Hickory Wall Hood Fits Best

The Omega National 30 inch Hickory Modern Taper Range Wall Mount Range Hood is suited to wall applications where the cooking surface sits against a vertical wall rather than an island. Its 30 inch width pairs well with a single standard range below, which keeps the hood edges tracking the appliance lines for a clean stacked look. As a hickory wood range hood, it fits projects that already specify hickory doors, drawer fronts, or frames, allowing one consistent species to run through bases, uppers, and the ventilation zone. The modern tapered design works in contemporary or transitional kitchen plans where straight edges and simple forms are preferred, so the hood does not compete with flat-panel doors or slab drawer fronts. Because it belongs to the wood range hoods category, this unit is aimed at cabinetry-centric builds rather than stand-alone metal hoods.

Details That Support Consistent Hood Install Results

The defined 30 inch wide size gives installers a clear target when framing the space between adjacent wall cabinets, which helps avoid irregular reveals around the hood face. The wall mount designation means the hood is planned in the same vertical plane as surrounding cabinets, making it easier to align bottom edges and crown treatments across the entire run. The modern taper shape presents flat surfaces and straightforward angles, which simplifies how the hood visually intersects nearby end panels or decorative light valances. Hickory construction keeps the hood in the same material family as hickory cabinets, so finishing workflows can treat the hood and cabinets as a unified set rather than mixing dissimilar materials. Being labeled as an Omega National wood range hood gives shops and designers a specific reference name and part number, R29T030SMB1HUF1, which helps avoid ordering errors when repeating the same hood across multiple units or projects.

Common Questions About This Omega National Hood

Select This Hood For Hickory Wall Mount Layouts

The Omega National 30 inch Hickory Modern Taper Range Wall Mount Range Hood gives cabinet-focused projects a defined 30 inch wood hood sized for typical wall ranges. The hickory construction lets the hood visually join hickory cabinet runs, while the modern tapered form supports straightforward, contemporary elevations. With a clear wall mount designation and the specific Omega National part number R29T030SMB1HUF1, this hood suits designers and installers building coordinated kitchen layouts through Wurth Baer Supply.