NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR5136SMB17UF1 to RSR5136SMB17UF1.
Omega National 36 inch Rift White Oak Range Hood describes a straight accent wood wall mount hood that forms the base of a custom mantel-style installation. The 36 inch width and straight valance create a defined focal point over a standard cooking area, so the hood visually anchors the run of cabinets. The rift white oak construction provides a consistent linear grain, which supports modern or transitional kitchen designs where grain direction matters. As part of Omega National Products wood range hoods, this unit is built for integration with cabinetry, which helps installers tie the hood into surrounding casework. The hood is designed as an accent piece, so it visually separates the cooking zone while still reading as part of the cabinet layout.
This accent wood range hood is described as a wall mount design, so it is intended to be fixed to the wall structure and tied into the surrounding cabinet run. Because it simply attaches to adjacent cabinets, installers can use standard cabinet-installation techniques for alignment, allowing the hood face to flush out with neighboring boxes. The available 30 inch and 36 inch widths help match common cooktop spans, which supports centered layouts. With three height options - 24 inch, 30 inch, and 36 inch - the hood can be set to suit the upper cabinet configuration, improving crown transitions and vertical proportions above the range.
This accent wood range hood is part of Omega National Products wood range hoods, placing it in kitchen and bath cabinet accessory work where a built-in appearance is desired. The 36 inch width makes it suitable for installations where the cooking surface aligns with a 36 inch span, helping keep vertical centerlines consistent with the base cabinet below. Because the hood attaches to adjacent cabinets, it fits naturally between wall cabinets in a typical run, so the installer can plan standard filler, scribe, and trim details around it. The straight valance option offers a clean front line that works with squared cabinet doors, while the availability of an arched alternative in the same system allows designers to repeat curves if needed on similar projects.
The ability to add doors or accent panels of your choice above the valance means this hood becomes the lower component of a mantel-style assembly. In practice, that allows a run of wall cabinets to step up over the range using matching doors, so the cooking center appears framed rather than isolated. For projects using rift white oak, the specified rift white oak construction helps the hood grain align with custom panels, which is important when joining wide face surfaces. When paired with other available species such as Cherry, Maple, Red Oak, White Oak, Hickory, or Alder from the broader line, designers can carry a single species and finishing schedule throughout the kitchen and bath spaces.
The silver metallic liner is described as compatible with all Broan ventilation available through Omega National Products, which simplifies planning the ventilation package because the liner is defined to work across that Broan range. In the field, this compatibility helps avoid reworking the interior of the hood to suit different Broan blower choices available through the same source. By centering the Broan-compatible liner inside the wood shell, trades can maintain clearances around the blower and duct transitions while preserving the finished face.
The hood being an economical alternative to stand alone hoods shapes project budgeting, allowing more cost to shift toward doors, panels, or finishing steps without losing the visual impact of a wood focal point. Since the hood simply attaches to adjacent cabinets, installers can align it during the same wall cabinet set, which helps keep rail heights, reveals, and gaps consistent from cabinet to hood and back to cabinet. The straight valance design supports straightforward crown or light-rail terminations at the lower line, which can reduce layout complexity at the junction between decorative trim and the hood face. Across multiple projects, those consistent attachment and layout traits support repeatable installation workflows and finishing processes.
The Omega National R5136SMB17UF1 is an accent wood range hood, so it serves as the wood hood structure that defines the cooking focal point within a cabinet run.
This accent wood range hood is a wall mount unit that simply attaches to adjacent cabinets, so it installs as part of the upper cabinet run against the wall.
This accent hood is available in 30 inch and 36 inch widths, which helps align the hood span with common cooktop sizes and cabinet modules.
The hood features height options of 24 inch tall, 30 inch tall, and 36 inch tall, so it can match different cabinet stack heights and ceiling conditions.
The silver metallic liner is compatible with all Broan ventilation available through Omega National Products, which lets planners pair the hood shell with various Broan blower choices.
This hood is available in Cherry, Maple, Red Oak, White Oak, Hickory, and Alder, so cabinetmakers can select a species that aligns with existing or planned cabinetry.
This Omega National wood range hood gives installers a rift white oak straight accent hood sized at 36 inches wide for mantel-style wall mount projects. With three height options, multiple species choices, and a Broan-compatible liner, it supports coordinated design and ventilation decisions on custom kitchen jobs.
Sold In: 1 Each