NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPRCH19T0307UF1 to RSRCH19T0307UF1.
30 inch farmhouse tapered hood chimney describes a Rift white oak chimney section designed for 30 inch wide wall hoods, so it gives a defined upper enclosure above a matching wood range hood. The Rift white oak material provides a straight-grain wood surface, which supports a consistent farmhouse look when coordinated with Rift white oak cabinetry or trim. The tapered chimney shape creates a narrower profile as it rises, which helps the hood installation read as a finished architectural element instead of a bare vent transition. As a component classified as a chimney for wood range hoods, this part is intended to work visually with a wood range hood body, which helps the entire assembly read as one unit over the cooking area. The farmhouse description signals a simple, traditional form, which supports kitchen designs focused on clean lines and warm wood tone.
30 inch wall hood chimney in the description indicates this chimney is sized for wall-mounted hood layouts that measure 30 inches wide, so it lines up with that hood width in the finished elevation. The classification as a chimney for wood range hoods shows this part is intended to sit above a wood hood body, which lets installers carry the same wood species upward for a continuous look. The Omega National Products brand on this Rift white oak chimney ties it to a known maker of wood range hood components, which supports consistent detailing with other Omega National wood hood elements in the project. The tapered configuration in a 30 inch width helps the chimney transition from the hood body toward the ceiling plane, which can simplify visual alignment with adjacent wall cabinets or trim.
Rift white oak range hood chimney describes a wood chimney component that visually extends a wall-mounted wood range hood in Rift white oak, so it fits kitchen runs where that species is part of the cabinet design. The 30 inch width reference ties this farmhouse chimney to 30 inch wall hood layouts, which matters when planning upper cabinet spacing and hood centering over the cooking surface. As part of the chimneys for wood range hoods class, this piece occupies the vertical zone above the hood body, which helps conceal the vent path while maintaining a consistent wood presence in the cooking area. The farmhouse tapered profile works in designs that call for a modest, traditional form, which makes it suitable for kitchens that avoid heavy ornament but still want a defined hood feature. The Omega National Products branding places the chimney within a line focused on wood range hoods, which supports cohesive styling when the hood body is drawn from the same family.
The tapered chimney geometry for a 30 inch wall hood creates a visual step as the chimney rises, which helps break up the block of wood mass and keeps the hood assembly from appearing overly bulky. Because it is Rift white oak, the chimney carries a straight, linear grain pattern, which supports crisp vertical lines that align well with modern farmhouse and transitional cabinet doors. As a dedicated component for wood range hoods, this chimney lets installers treat the hood and upper enclosure as one coordinated assembly, which can streamline layout decisions around adjacent wall cabinets and molding terminations. The farmhouse styling language keeps the profile restrained, which helps the hood presence stand out without competing with other millwork in the kitchen. The defined 30 inch orientation gives designers a clear upper piece for that hood width, which simplifies drawing elevations and communicating expectations with clients during the planning phase.
The 30 inch farmhouse tapered hood chimney is specified for 30 inch wide wall hoods, so it visually continues a wall-mounted hood installation across the width of the cooking area.
The Rift white oak chimney presents a straight-grain wood surface, which supports uniform color and grain alignment with Rift white oak cabinets or trim in the same kitchen run.
The farmhouse label indicates a simple, traditional form, which suits kitchens that favor straightforward profiles and a warm wood presence around the range area.
The tapered chimney narrows as it rises, which visually softens the transition from the 30 inch hood body to the ceiling zone and helps the hood read as a finished feature.
As a chimney for wood range hoods, this component continues the wood above the hood body, which helps create a unified vertical element over the cooktop.
The chimney is produced by Omega National Products, which positions it within a dedicated line of wood range hood components for coordinated kitchen projects.
RCH19T0307UF1 chimney identifies a specific Omega National Products farmhouse tapered hood chimney sized for 30 inch wall hoods in Rift white oak, so designers and installers can call out this part number when they need a tapered Rift white oak chimney to visually extend a 30 inch wood range hood in a farmhouse-influenced kitchen.
Sold In: 1 Each