Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Omega National Farmhouse series chimney is the upper extension piece that bridges a 48-inch wall range hood to the ceiling, finished in rift white oak and ready to accept stain or paint after installation.
A wall hood shell handles the decorative work at eye level, but it rarely reaches the ceiling on its own. The chimney is the section that extends upward from the top of the hood body to close that gap, creating a continuous vertical column from the cooktop to the ceiling. Without it, the hood sits as an isolated element with exposed wall above. With it, the entire assembly reads as an integrated architectural feature built into the kitchen.
This chimney is part of the Farmhouse series and is proportioned to pair with the 48-inch wide hood in that line. The 37-1/2-inch width and 13-3/4-inch depth carry the hood's footprint straight up, so the transition from hood to chimney is flush rather than stepped.
Rift white oak is cut at an angle to the growth rings, which produces a notably straight, tight grain with minimal ray fleck compared to plain-sawn oak. That grain consistency makes it easier to match stain across the chimney and the hood below, and it pairs well with rift-sawn cabinet doors when the goal is a uniform, linear grain direction across the whole kitchen. The chimney ships unfinished, so the finishing happens on-site after installation, which lets the painter or finisher treat the chimney and the hood body in one pass for a seamless result.
This chimney suits a wall hood installation where the ceiling height requires an extension above the 48-inch Farmhouse hood shell. It is a strong fit for kitchens with white oak cabinetry, for transitional designs that blend farmhouse character with cleaner lines, and for any project where grain consistency matters more than the pronounced ray fleck of plain-sawn oak. Because it ships ready-to-finish, it works best when finishing is handled by the installer or a finisher on-site rather than ordered pre-finished. This is the decorative extension piece only: the ventilation unit and the hood shell are separate products.
No. This is the chimney extension piece only. The Farmhouse hood shell and the ventilation insert that moves air are each separate products, ordered to suit the installation.
The chimney is 24-3/4 inches tall. The total height it covers depends on the hood shell height below it. Measure the gap between the top of the hood and the ceiling to confirm the chimney height works for the specific installation.
Yes. The wood ships unfinished and accepts both paint and stain. If the kitchen uses painted cabinetry, this chimney can be primed and painted on-site to match.
No. Rift-sawn oak is cut at an angle to the growth rings, producing a straighter, more uniform grain with less ray fleck than plain-sawn. If the surrounding cabinetry uses rift-sawn oak, this chimney is a closer visual match than a plain-sawn piece would be.
When a 48-inch Farmhouse wall hood needs to reach the ceiling, this rift white oak chimney completes the run with grain and proportion that carry the design all the way up.
Sold In: 1 Each