Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPT96-BR to RST96-BR.
Omega Tambour Track System 96 Straight gives you a straight surface-mount track designed for tambour door applications where a linear run is required. This track is part of a tambour track system, so it defines the guided travel of the door and helps keep the movement consistent along its length during daily use.
The straight design keeps the door moving in one plane, which is important where the door needs to rise or slide without changing direction. As a surface-mount track, it installs directly on the cabinet or casework surface, so the track position is determined by layout rather than recessed joinery. That helps streamline planning for appliance garages and similar tambour projects.
The 96 inch length gives you an 8 foot run to work with, providing continuity along wider cabinet spans. This helps reduce joints between track sections in many layouts, which supports smoother door motion and more predictable alignment of the tambour slats over the full opening.
This straight surface-mount track installs on the cabinet surface rather than in a routed channel, so layout is driven by accurate positioning against the cabinet face or interior wall. That supports retrofits or new work where cutting deep grooves is not part of the plan, and it lets the track sit where the door path demands.
At 96 inches long, the track can span a wide opening or full cabinet section, which helps maintain tambour alignment from one end of the run to the other. Using a single continuous track segment across an 8 foot length reduces breaks that might otherwise require extra alignment steps between multiple shorter pieces.
The straight pattern suits cabinet designs where the tambour travels in a simple line, such as rising vertically or sliding horizontally. That direct path helps maintain consistent clearances around the opening, which in turn supports smoother operation when the door rolls along the track each time it is moved.
This Omega Tambour Track System 96 Straight piece fits projects in the Appliance Garages & Tambour Doors class, where a straight guide is needed along a cabinet or enclosure. The 8 foot length serves wider appliance garage runs or multi-door banks that share a continuous top or side channel.
In kitchen or bath cabinet settings, the brown straight track can align with interior finishes to keep the focus on the tambour face while the guide does its job in the background. The surface-mount orientation lets the installer position the track in relation to shelves, dividers, or appliance clearances while still holding a precise linear path for the door.
Because this track is part of a designated tambour track system, it plays the role of defining travel for the matching tambour components chosen for the opening. That system orientation helps keep the tambour slats moving along an expected route whenever the door is opened or closed in normal cabinet use.
The straight geometry of this track sets a linear reference for the tambour, which helps the door operate with repeatable motion every time it is moved. Installers can align the 96 inch run with cabinet edges or appliance garage openings, so the tambour path parallels the structure and keeps clearances predictable along the full travel.
The surface-mount style means the track sits proud of the substrate instead of being buried, which simplifies many layouts by basing the door path on visible reference lines rather than hidden grooves. That approach helps installers relate the track directly to adjacent components such as face frames or cabinet sides while dialing in the opening size.
The brown finish contributes to visual integration inside cabinets that use similar tones, helping the track blend with the interior while still marking a clear path for the door. Across its full 8 foot length, the continuous track offers a single guiding channel for the tambour, which aids in keeping the slats supported through the open, intermediate, and closed positions.
The Omega Tambour Track System 96 Straight is a straight, surface-mount track for tambour doors, so it guides the door along a single linear path on the cabinet surface.
The Nevamar T96-BR tambour track is 96 inches, or 8 feet, long, which lets it span wider cabinet or appliance garage openings with a single continuous guiding run.
The surface-mount design places the track on the cabinet surface rather than in a groove, so the door path is set by visible layout lines along the interior or face of the cabinet.
This straight tambour track is used in Appliance Garages & Tambour Doors, giving a linear guide for doors in kitchen and bath cabinets or similar casework openings.
The brown color gives the track a darker tone, helping it visually blend with comparable cabinet interiors so attention stays on the tambour door surface.
The manufacturer part number T96-BR identifies this specific 96 inch straight, brown track within the Omega tambour track system, helping match it to project documentation.
The Omega Tambour Track System 96 Straight surface-mount track T96-BR provides a defined, 8 foot linear guide for tambour doors in appliance garage and cabinet applications. When a straight, surface-mounted brown track fits the layout, this component aligns the door path along the cabinet structure for consistent day-to-day operation.
Sold In: 1 Package