Kapex Table Mount for Best Fence is a Fastcap mounting bracket that secures a Best Fence system to a Kapex saw on the right side. It connects the fence system to the saw so both work as a single, aligned unit during repeated cuts. The mount locks directly into the Kapex saw channel, so the Best Fence system follows the saws reference surface instead of a separate support. This right-side configuration helps installers and shop teams extend the Kapex table while keeping the same cut line. The bracket is part of the Best Fence system, so it is designed around the way that system supports workpieces along the saw. Using a dedicated Kapex mount on the right side avoids ad hoc clamping that can shift under load, which supports predictable cuts when working with trim, moldings, and other finish materials.
This Fastcap bracket mounts a Best Fence system to the right side of a Kapex saw, tying the extension fence directly to the saw body. Because the mount engages the Kapex saws built-in channel, it relies on a fixed reference surface built into the tool instead of external stands or clamps. That connection helps keep the Best Fence system aligned with the Kapex table and blade path when material is slid along the fence. Locking into the saw channel also resists shifting as boards are loaded, which matters when cutting longer stock where small movements at the mount can create visible deviation at the cut. With the fence supported from the right side in this way, installers can stage repeat trim or casing cuts along a consistent reference.
The Kapex Table Mount for Best Fence fits on the right side of a Kapex saw where the saw provides a built-in channel. Fastcap designed this bracket so the Best Fence system locks into that channel, positioning the fence extension along the factory table edge. In use, this places the Best Fence support in line with the Kapex work surface, so boards rest on a continuous plane from the saw onto the fence system. For installers working with the Best Fence system, that right-side location lets them carry long trim or other stock past the blade while referencing the same fence alignment from one end to the other. On site or in the shop, the bracket helps turn the Kapex into a more extended station without changing the saws original mounting interface.
This Kapex saw Best Fence mount locks directly into the saws built-in channel, which sets the Best Fence system off a known, machined feature on the Kapex. By tying the fence extension to that channel, the bracket transfers the saws alignment into the fence run, supporting straight and predictable cuts. The product description notes that this setup delivers the full precision and accuracy of the Best Fence system, so the mount is a key link between the saw and the fence sections when repeatability matters. Because the bracket mounts on the right side, installers can standardize workflows around pulling measurements and setting stops along that side of the Kapex. Over multiple cuts, the locked connection to the channel helps the Best Fence system avoid small shifts that could otherwise cause gaps at joints or inconsistent part lengths.
Kapex Table Mount for Best Fence is a Fastcap bracket that secures a Best Fence system to the right side of a Kapex saw, so the fence extension follows the saws alignment during cutting.
The Fastcap Kapex Table Mount for Best Fence locks directly into the Kapex saws built-in channel, using that channel as the mounting interface for the Best Fence system.
The Kapex Table Mount for Best Fence is described as the right-side mount, so it is used to position the Best Fence system on the right side of the Kapex saw.
By locking into the Kapex built-in channel, the mount allows the Best Fence system to deliver its full precision and accuracy along the same reference as the Kapex table.
The manufacturer part number for the Kapex Table Mount for Best Fence, Right is BF-KPX TABLE MT RIGH, which helps identify this specific right-side bracket.
The Kapex Table Mount for Best Fence secures the fence extension to the saw, supporting longer boards so they stay aligned with the Kapex cut path during repeated cuts.
The Kapex Table Mount for Best Fence, Right gives installers a Fastcap bracket dedicated to tying a Best Fence system into a Kapex saw on the right side. Because it locks into the Kapex built-in channel, the mount connects the fence support directly to the saws own reference surface. That link helps the Best Fence system deliver the precision and accuracy described in the product information when cutting repeated parts. For teams building a Kapex-based Best Fence station, this right-side bracket aligns the extension fence with the saw so trim, casing, and other components can be processed against a consistent fence run. When a project calls for a right-side Best Fence layout on a Kapex platform, this bracket is the part that creates that connection.