
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Izzy Skirt Washer pack 10 is a Fastcap screw cover washer designed for installing table tops, so it works as a dedicated fastening component rather than a general-purpose washer. The washer is described as a skirt washer, which means its shape helps control how the screw head bears on the table support, giving a more predictable interface between the screw and the underside of the top. Fastcap positions this washer within screw cover caps and washers, so it serves both a structural and finishing role in the fastener stack. The washer is built specifically to offer full adjustability when installing table tops, allowing the tabletop position to be fine-tuned relative to its base during installation. That adjustability helps installers dial in alignment between the top and the understructure, which is valuable when matching edges, managing slight variations in frames, or correcting small layout discrepancies on site.
This skirt washer is specifically described as offering full adjustability when installing table tops, so it creates a controlled zone where the tabletop can move slightly relative to the screw location before lock-down. That ability to adjust after positioning helps during layout when a top needs to be brought flush with aprons or frames, especially when dealing with small construction tolerances. Because the part is a screw cover washer, it interacts directly with the screw head, supporting the head while helping manage how pressure is distributed into the underside of the tabletop. Being part of the screw cover caps and washers class, it fits naturally into workflows where the installer wants both functional support and a more finished fastener area under the top.
The Izzy Skirt Washer pack 10 is described for installing table tops, so its primary role is at the interface between a tabletop and the supporting base or frame. As a skirt washer, it sits around the screw head at these connection points, shaping how the screw clamps the top to the structure. Being part of a screw cover caps and washers category, it suits woodworking projects where visible or semi-visible fastener zones under the top still benefit from a controlled bearing surface. In table builds that use multiple fasteners along aprons or rails, using the same Izzy Skirt Washer at each station supports a consistent clamping pattern. That consistency across all fastening points helps the top settle evenly on the frame, which is especially useful for shop-built or on-site assembled tables.
The washer is explicitly described as offering full adjustability when installing table tops, so it is intended to allow repositioning of the tabletop relative to its fasteners before final torque. That adjustability lets the installer nudge the top into its final location while screws are still slightly loose, so edges can be aligned with bases, overhangs can be made uniform, and minor frame variances can be compensated. Because the Izzy Skirt Washer works as a screw cover washer, it still supports the screw head during this process, so the head continues to bear on a defined surface as adjustments are made. Once the desired position is reached, tightening the screws locks the top against this skirt washer interface, helping preserve the adjusted alignment. Over a run of fastening points, this combination of bearing support and adjustability helps reduce the need for re-positioning work and supports more predictable final results.
The Izzy Skirt Washer is a Fastcap screw cover washer designed for installing table tops, so it supports the screw head while helping manage how the tabletop clamps to its base.
The Izzy Skirt Washer offers full adjustability when installing table tops, so the tabletop position can be shifted relative to the fasteners before final tightening for better alignment.
The Izzy Skirt Washer is used at the fastening points between a tabletop and its supporting frame or base, where it sits under the screw head and shapes the clamping interface.
Being a screw cover washer means the Izzy Skirt Washer works directly with the screw head, providing a defined bearing area that supports both function and a controlled finished zone.
Full adjustability lets the tabletop be nudged into its final position while screws are partially tightened, so overhangs, edges, and frame relationships can be tuned before lock-down.
The Fastcap Izzy Skirt Washer sits within a woodworking-focused screw cover caps and washers range, so its adjustability and form are tailored to table and furniture projects.
The Izzy Skirt Washer pack 10 groups ten Fastcap screw cover washers under one part number, IZZY SKIRT 10 PC, so a single selection supports multiple table top fastening points. Because each washer is described as offering full adjustability when installing table tops, choosing this pack equips a project with hardware that supports fine-tuned alignment at every connection. Its role as a skirt washer in the screw cover caps and washers class positions it well for furniture and woodworking jobs where tabletop position and clamp behavior matter. For installers and shops building or mounting table tops, this product offers a focused way to manage how tops seat on their frames.