Power Mag Hole 9/16 x 1/8 is a Fastcap magnetic catch designed as part of the locks and latches catches category, so it works as a compact solution for holding doors or panels closed in woodworking projects. The catch delivers 3.5lbs of holding power, which keeps doors or access panels firmly shut under normal use without relying on bulky mechanical latches. The 9/16 inch by 1/8 inch sizing defines the magnet body footprint, helping installers plan recesses or mounting locations with predictable clearance. As a Fastcap product, the Power Mag Hole 9/16 x 1/8 aligns with common cabinet and fixture hardware used by professional shops, which supports consistent hardware choices across multiple jobs. The product is supplied in a 10 pack, which suits small production runs or multi-door installations where repeating the same catch keeps layout and performance uniform.
The 9/16 inch by 1/8 inch dimensions define the basic installation envelope for the Power Mag Hole catch, letting installers size holes or recesses so the magnet sits flush and does not interfere with door swing. The 3.5lbs of holding power guides how far from the door edge the magnet can be positioned while still keeping a reliable close, which matters when balancing smooth opening with secure retention. Being a catch within the locks and latches category clarifies that it is intended as the holding element in a closure, so layout focuses on aligning the magnet with a mating surface on the door or frame for repeatable engagement. The 10 pack quantity supports repetitive installation, letting installers maintain spacing, alignment, and performance across a bank of doors or panels without switching hardware mid-job.
The Power Mag Hole 9/16 x 1/8, defined as a catch within the locks and latches category, serves well on cabinet doors, small access panels, or light-duty hatches where a simple magnetic hold is sufficient. Its 3.5lbs of holding power suits applications where doors need to stay closed during everyday use yet still open with a controlled pull, which is common in shop fixtures and interior cabinetry. The compact 9/16 inch by 1/8 inch size lets the Fastcap magnetic catch sit in narrow rails, thin stiles, or tight face-frame areas, which helps maintain clean lines on finished pieces. Because the product is part of the Fastcap line, shops that already rely on Fastcap solutions can apply the same catch across multiple fixtures, keeping hardware behavior familiar for installers and end users. The POWER MAG HOLE 1/8 part number further supports repeat deployment, as it clearly identifies the same magnet when matching details from previous projects.
The specified 3.5lbs of holding power on this Fastcap Power Mag Hole magnet provides a predictable pull force, which helps reduce rework from doors that feel too loose or overly stiff once installed. Knowing the catch measures 9/16 inch by 1/8 inch helps installers rout or drill accurate cavities, which keeps the magnet aligned and flush so doors close cleanly against the frame. The clear classification as a catch inside the locks and latches category defines its role as the holding device, allowing installers to design mating plates or surfaces that contact the magnet squarely for repeatable closure. Using the POWER MAG HOLE 1/8 part number across drawings, cut lists, and purchase records connects field installation to shop planning, which supports consistent hardware selection when projects move from prototype to repeat production. The 10 pack quantity also makes it straightforward to outfit multiple doors or compartments with identical holding behavior, supporting uniform feel and alignment across a run of cabinets or fixtures.
The Power Mag Hole catch provides 3.5lbs of holding power, giving doors and panels a defined pull resistance that supports secure closure without requiring excessive force to open.
The Power Mag Hole is sized at 9/16 inch by 1/8 inch, allowing installers to design recesses or mounting points that fit the magnet closely for clean, low-profile installation.
The Power Mag Hole is classified as a catch within the locks and latches category, so it functions as the holding element for doors and panels rather than as a structural fastener.
The POWER MAG HOLE 1/8 designation is the manufacturer part number, giving shops a precise identifier to reference in drawings or orders when they want this specific magnet.
The Power Mag Hole 9/16 x 1/8 catch is produced by Fastcap, aligning it with other Fastcap hardware used in woodworking and cabinet construction.
The 10 pack format lets installers equip several doors or panels with the same Fastcap Power Mag Hole catch, supporting consistent feel and closure behavior across a project.
The Fastcap Power Mag Hole 9/16 x 1/8 catch combines its 3.5lbs of holding power with a compact footprint, giving installers a defined, repeatable way to keep doors and panels closed. The POWER MAG HOLE 1/8 part number and 10 pack format help shops specify and deploy the same magnet across drawings, cut lists, and field work. For cabinet, fixture, or access-panel projects that benefit from a small magnetic catch in the locks and latches category, the Power Mag Hole 9/16 x 1/8 offers a straightforward path to uniform closure performance.