Wood pilaster system uprights from Rev-A-Shelf Corporation provide a side-mounted support structure that carries adjustable shelves or wood drawer boxes in tall cabinets. The set uses four 42.32 inch x 0.88 inch pilaster uprights, so installers get consistent vertical runs sized for full-height storage layouts. Natural maple construction with a semi-gloss finish keeps the support components visually aligned with typical cabinet interiors, which matters when customers want functional hardware to blend into finished woodwork. The system is designed for any tall cabinets, which gives layout flexibility across different pantry or utility cabinet heights. Pilaster uprights can be stacked to reach the desired height, allowing you to build continuous support in oversized runs without switching to a different system. No visible pilaster system holes keep the interior appearance cleaner, which helps maintain a finished look even when shelves or drawer boxes are adjusted over time.
This pilaster system mounts to the cabinet side, so installers anchor the uprights directly to the interior walls of tall cabinets to carry shelves or Rev-A-Shelf wood drawer boxes. Patent pending right and left brackets can be used in the front and back, which simplifies layout because one bracket design works at both ends of the run. That bracket approach supports a straight, repeatable alignment between front and back, helping shelves or drawer boxes track square in tall cabinets. A wood mounting template is part of the system description, so hole positions for the pilaster uprights follow a consistent pattern from cabinet to cabinet. This unit holds 90 lbs per shelf, meaning that once side-mounted and bracketed, each supported level can be loaded within that rating for typical kitchen or utility storage.
The set uses four 42.32 inch x 0.88 inch pilaster uprights, so tall cabinets can be outfitted with matching vertical supports on both sides to carry multiple shelves or compatible drawer boxes. Because the system is designed for any tall cabinets, it can be applied in pantry, utility, or tall kitchen units where interior space needs to be divided into accessible levels. Pilaster uprights can be stacked to reach the desired height, which allows a run of uprights to extend from near the bottom to near the top of oversized cabinets without changing to an unrelated system. Mounting to the cabinet side positions the load-bearing structure directly against the interior walls, keeping the usable shelf width largely open while still providing a continuous support track. Natural maple construction with a semi-gloss finish lets these pieces sit visually close to typical cabinet interiors so installed uprights do not dominate the appearance.
Patent pending right and left brackets that can be used in the front and back give this pilaster system a single bracket style that works in both positions, reducing part variation while setting a clear front-to-back alignment line. When mounted to the cabinet side, those brackets interface between the pilaster uprights and shelves or compatible Rev-A-Shelf wood drawer boxes, helping keep each level square and supported within the system. No visible pilaster system holes means that the adjustment mechanism is concealed, so installers can change shelf or drawer box locations over time without exposing a row of open holes, which maintains a more finished look. The unit holds 90 lbs per shelf, so when used within that capacity, each level is supported by both the side-mounted uprights and the front and back bracket positions. Natural maple construction with a semi-gloss finish also supports a consistent visual line between brackets, uprights, and surrounding cabinet interiors, which can matter in open or glass-door tall cabinets.
The wood pilaster system is designed for any tall cabinets, so it serves pantry, utility, or tall kitchen applications where full-height interior support for shelves or drawer boxes is needed.
The pilaster uprights are 42.32 inches tall and 0.88 inches wide, giving a substantial vertical run that can be used as-is in tall cabinets or stacked when additional height is required.
The pilaster uprights can be stacked to reach the desired height, allowing installers to build continuous support in extra tall cabinets by combining uprights rather than moving to a different system.
Patent pending right and left brackets can be used in the front and back, so the same bracket style sets a consistent front-to-back support line for shelves or compatible wood drawer boxes.
The pilaster system holds 90 lbs per shelf, so each supported shelf or compatible drawer box can carry that amount of stored goods when anchored to the side-mounted uprights and brackets.
Natural maple construction with a semi-gloss finish helps the pilaster uprights blend with typical cabinet interiors, while no visible pilaster system holes preserve a clean, furniture-like interior look.
Rev-A-Shelf wood pilaster system uprights bring side-mounted support, natural maple construction, and a 90 lbs per shelf rating to tall cabinet interior layouts. When you need adjustable support for shelves or compatible Rev-A-Shelf wood drawer boxes in tall cabinets, this system supplies matched 42.32 inch x 0.88 inch uprights that can be stacked to reach the required height. Patent pending right and left brackets that work in the front and back, combined with no visible pilaster system holes, support both clean presentation and straightforward alignment. Select this pilaster system when a tall cabinet project calls for concealed-adjustment vertical supports with a documented per-shelf load rating.
Sold In: 1 Set