Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Fuller Collection Pull 160mm chrome is a Belwith Keeler handle designed for cabinets where a 6-5/16 inch center to center layout is required, so it aligns directly with drilling patterns based on that standard size. The pull belongs to the Belwith Keeler Fuller Collection, which gives projects a consistent visual line when the same model is used across doors and drawers. The chrome finish identifies the surface appearance as a bright metallic look that ties in with other chrome decorative hardware on the job. As a decorative handle and pull within the Wurth Baer Supply assortment, it fits into typical cabinet, furniture, and millwork hardware schedules where a defined center to center measurement is critical for layout. The manufacturer part number B076291-CH clearly ties this pull to Belwith documentation and ordering, helping keep reordering and job submittals organized.
The 160mm center to center measurement defines where mounting points fall, so drill locations follow that straight-line spacing across the door or drawer front. Because the pull is identified as 6-5/16 inch center to center, installers can convert between metric and imperial layouts without guessing, which helps on mixed-measure drawings. The handle and pull designation indicates it is intended for through-bolt style mounting on cabinet fronts, tying directly into common shop drilling patterns for decorative hardware. The consistent center to center dimension lets installers set up drilling jigs once and repeat the pattern across a run of fronts, keeping handle alignment even across the project.
The Fuller Collection Pull 6-5/16 inch center to center chrome from Belwith Keeler is positioned for use on cabinet doors and drawers where decorative hardware is required. As part of the handles and pulls category, it functions as the primary touch point for opening and closing fronts on casework, making it suitable for kitchen, bath, and general storage cabinetry that follows standard hardware conventions. The 160mm center to center specification means it fits layouts planned around that metric spacing, which is common on many contemporary cabinet programs. Because the finish is designated as chrome, the pull visually lines up with other chrome decorative elements in a space, such as hinges specified with chrome finishes or fixtures selected in a similar tone. The manufacturer part number B076291-CH links this specific piece to documentation and ordering systems, so it can be called out clearly on drawings or parts lists and then matched on site during installation.
The 160mm center to center sizing on this Fuller pull matters because that dimension governs drilling and alignment across doors and drawers, reducing layout variation when many fronts are handled in a single run. When a plan calls for 6-5/16 inch center to center hardware, using this pull keeps the hole spacing consistent with the specified measurement, which helps fronts line up visually when installed in rows or stacks. The chrome finish designation affects how the pull reads once installed, supporting a coordinated appearance with other chrome decorative hardware and fixtures in the same room. Being part of the Belwith Keeler Fuller Collection also matters when a project uses multiple pulls from the same family, because it keeps style and proportion consistent from cabinet to cabinet. Within Wurth Baer Supply's decorative hardware and moldings category, this handle fits into hardware schedules that rely on standard center to center dimensions, making it straightforward to repeat across future phases that call out the same part number.
The Fuller Collection Pull uses a 6-5/16 inch (160mm) center to center pattern, so mounting holes are spaced on that exact dimension across the cabinet front.
The B076291-CH pull is manufactured by Belwith Keeler, placing it within a recognized decorative hardware line used on cabinet and furniture projects.
The Fuller Collection Pull is identified as chrome, so its visible surface presents a chrome appearance that coordinates with other chrome decorative hardware.
This product is classified as decorative hardware and moldings in the handles and pulls category, so it serves as a cabinet handle in typical installations.
The center to center measurement is 160mm, which corresponds to 6-5/16 inch, helping align metric-based and imperial-based layout drawings.
This pull can be referenced by the manufacturer part number B076291-CH and the description Fuller Collection Pull 6-5/16 Inch (160mm) Center to Center Chrome.
The Fuller Collection Pull 6-5/16 inch (160mm) center to center chrome from Belwith Keeler gives projects a defined 160mm drilling pattern and a chrome finish that ties into decorative hardware plans. When cabinets or casework call for a 6-5/16 inch center to center handle in a chrome appearance, this Belwith Keeler Fuller model matches that specification and can be identified by part number B076291-CH and its handles and pulls category placement during selection and ordering.