
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
96mm Inspirations rope pull from Amerock Corporation is a zinc die-cast cabinet handle in a satin nickel finish, so it provides a defined 3-3/4 inch center-to-center mounting layout that matches common cabinet drilling patterns on doors and drawers. The pull measures 4-7/8 inches in overall length, which spans typical cabinet rail widths and gives enough hand clearance across standard drawer fronts. A 1-1/4 inch projection stands the handle off the surface, creating space for a solid grip while keeping the pull close enough to reduce snagging on clothing in daily use. The 7/16 inch width at the gripping area concentrates the hand contact where you need leverage without looking bulky on narrower rails. The Inspirations design uses clean, classic lines in a casual, relaxed style, so it works across a wide range of decor from traditional to more transitional cabinet layouts.
The specified 3-3/4 inch center-to-center measurement on this Amerock BP1784G10 pull defines exactly where the two mounting points land, which simplifies layout when you are drilling new cabinet fronts or matching an existing 96 mm pattern during replacements. The 4-7/8 inch overall length helps you position the pull so its ends sit consistently relative to door and drawer edges, supporting straight visual lines across a full bank of cabinets. With a 1-1/4 inch projection, the pull stands out just enough to grip without creating an excessive offset, which helps maintain clearance in tight galley kitchens or narrow hallways where cabinet fronts sit close to traffic paths.
The Amerock Corporation BP1784G10 Inspirations pull is designed as a handle for cabinet doors and drawers, so the 3-3/4 inch (96 mm) center-to-center layout aligns with a widely used drilling standard across many residential and shop-built cabinets. The satin nickel finish lets this pull sit comfortably on painted casework or lighter wood species, creating a neutral metal tone that ties in with other satin nickel decorative hardware and moldings. The rope-influenced profile within the Inspirations collection gives subtle detail along the grip, so it suits projects where you want more visual interest than a plain bar while staying within a clean, classic style. Because the pull length is 4-7/8 inches, it visually anchors medium-width drawer fronts and typical upper or lower doors, helping keep hardware scale appropriate without overwhelming the face of the cabinet.
The 96 mm center-to-center screw spacing on this zinc die-cast pull provides a repeatable mounting reference, which makes it straightforward to use templates or jigs for drilling a full kitchen or bank of shop cabinets with consistent handle locations. The 7/16 inch width gives the grip a defined, narrow profile, so multiple pulls can be lined up on stacked drawers without crowding, maintaining clear separation between hardware pieces. With its 1-1/4 inch projection, the handle offers enough depth for fingers to wrap behind the pull, which improves everyday usability on heavier loaded drawers while keeping the overall cabinet front profile relatively low. The satin nickel finish across the Inspirations design helps maintain a unified appearance when the same pull is repeated throughout a room, so all doors and drawers share the same sheen and color tone for a clean, finished look.
The Amerock Inspirations rope pull has a 3-3/4 inch (96 mm) center-to-center dimension, so the mounting holes are spaced to match standard 96 mm cabinet drilling layouts.
The BP1784G10 pull measures 4-7/8 inches in overall length, 1-1/4 inches in projection, and 7/16 inches in width, which defines its footprint and hand clearance on cabinet fronts.
This Amerock Inspirations pull is made from zinc die-cast material, which shapes the rope-style design and provides a consistent, solid-feeling handle profile.
The 96mm Inspirations rope pull has a satin nickel finish, giving it a smooth, muted metal appearance that coordinates with other satin nickel decorative hardware.
This satin nickel Inspirations pull is used on cabinet doors and drawers, so it suits kitchen, bath, or built-in cabinetry needing a 96 mm handle layout.
The Amerock part number BP1784G10 identifies this specific Inspirations collection pull with a 96 mm center-to-center measurement and satin nickel G10 finish code.
The Amerock 96mm Inspirations rope pull in satin nickel combines a 3-3/4 inch center-to-center layout, 4-7/8 inch overall length, and 1-1/4 inch projection, so it aligns with common cabinet drilling patterns while offering practical hand clearance. The zinc die-cast construction and 7/16 inch width establish a defined rope-style profile that suits doors and drawers across a full run of cabinetry. For projects calling for satin nickel decorative hardware with clean, classic lines, this BP1784G10 pull provides a consistent, cataloged option you can specify by exact dimensions and finish.
Sold In: 1 Each