Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Du Verre Series 3 pull is a contemporary aluminum bar pull for cabinet doors and drawer fronts, finished in Oil Rubbed Bronze and drilled to one of the most common hole patterns in residential cabinetry.
At 3-3/4 inches between centers, this pull mounts on the hole spacing that appears most frequently in stock and semi-custom cabinetry. For a homeowner refreshing a kitchen or a contractor swapping out worn hardware on an existing cabinet run, that spacing means no new holes and no patching. The 4-1/2 inch overall length gives enough visual presence on a mid-width drawer front without overcrowding the face, and the 1/2 inch bar section keeps the profile lean enough to suit both slab and frame-and-panel doors.
The pull is made from aluminum with a die-cast construction and finished in Oil Rubbed Bronze. Oil Rubbed Bronze is a chemically darkened finish with warm brown undertones and a low reflectivity that sits comfortably next to natural wood, painted fronts, and stone countertops alike. Unlike a polished or plated surface, it does not pick up highlights under kitchen lighting, which keeps the hardware from pulling attention away from the cabinetry. Aluminum construction makes this pull lighter than a zinc equivalent at a comparable size, which is noticeable across a full cabinet run.
This is a practical choice for a full kitchen refresh where the hole pattern is already set and the design direction is contemporary with warm-toned metals. It suits base drawer banks, upper cabinet doors, and bathroom vanity drawers equally well at this spacing. Cabinet shops building contemporary transitional kitchens will find this pull pairs cleanly with both natural wood and painted finishes, and the Series 3 collection carries companion pieces in the same design language for buyers who want to run pulls on drawers and coordinate knobs on doors from one family.
Yes. The 3-3/4 inch spacing appears in the catalog as both 95 mm and 96 mm depending on the source, but these reflect the same standard hole pattern. This pull fits cabinets drilled to the 3-3/4 inch standard.
The source data does not specify whether this finish is sealed with a topcoat or left as a living finish. If patina development matters for your application, confirm with the manufacturer before ordering.
Aluminum is lighter than zinc at a comparable cross-section, so the pull feels less heavy in the hand. Both materials are durable for interior cabinet use.
A bar pull of this size works on both. It is a common choice on drawer fronts at the 3-3/4 inch spacing, and it installs on doors the same way.
When the holes are already there and the finish direction calls for a warm bronze tone, this Series 3 pull closes the gap between an existing cabinet run and updated hardware without a trip to the drill press.
Sold In: 1 Each