Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Du Verre Series 3 pull is a contemporary aluminum bar pull designed for cabinet doors and wide drawer fronts, spanning 7-1/2 inches center-to-center in an Antique Brass finish.
A pull at this center-to-center spacing is sized for the wide, heavy fronts that see the most use in a kitchen: the deep base drawer that holds pots, the wide three-bank drawer below an island, or the tall pantry door that swings out fully loaded. At that scale, a short pull feels undersized and disappears against the front. A 7-1/2 inch span carries the visual weight those fronts require and gives both hands somewhere to land when the drawer is coming out full. The 9-3/4 inch overall length extends slightly beyond the mounting holes on each side, which softens the hardware into the front rather than anchoring it at two hard points.
The Series 3 pull is made from aluminum and die-cast aluminum, a material choice that keeps weight in check on a pull this size while holding crisp edges along the bar profile. The 1/2 inch bar width keeps the silhouette narrow, so the pull reads as a fine line rather than a structural element even at nearly 10 inches overall. Antique Brass is a warmed, aged gold tone with a patina that sits between a raw brass and a lacquered one. It brings depth to the finish rather than brightness, which suits traditional and transitional kitchens as readily as contemporary ones. The finish coordinates with the rest of the Series 3 family, so mixing pulls on drawers and knobs on doors from the same collection stays consistent in both color and character.
This is the pull for a designer or cabinet shop specifying hardware on a kitchen where the wide drawers are a design feature rather than background furniture. It suits a shaker or flat-panel base cabinet with a wide three- or four-drawer bank, a furniture-style island, or a butler's pantry where the hardware scale should match the cabinetry scale. Because the 7-1/2 inch center-to-center is a specific drilling dimension, it is equally useful for a replacement project where the existing holes are already at that spacing and the goal is to step up in finish quality without redrilling.
Measure the distance between the centers of the two mounting holes on your current pull. If that measurement is 7-1/2 inches (190 mm), this pull mounts without any new drilling.
Aluminum is lighter than zinc at equivalent volume, which matters on a pull approaching 10 inches overall. The trade-off is that aluminum typically takes a finish differently than zinc, and the Antique Brass on this pull is specific to this material and this series.
A pull at this span can be used on a tall cabinet door, a pantry door, or a wide drawer front. The 7-1/2 inch spacing drills the same way regardless of the front it goes on.
The Series 3 collection includes other hardware in the same design language. Matching knobs and pulls in the same series keep the finish and profile consistent across a kitchen.
Choose this pull when the drawer front is wide enough that the hardware should span it purposefully, and the finish should read as aged and warm rather than bright.
Sold In: 1 Each