Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Du Verre Stacked pull is a back-to-back bar pull spanning 30 inches overall and mounting on 18-inch (457 mm) centers, sized for the wide drawers, tall pantry fronts, and oversized cabinet doors that a standard pull cannot span with authority.
A pull at this center-to-center spacing exists for fronts that need hardware in proportion with their scale. Wide base drawers, full-height pantry doors, and island fronts all share the same problem: a shorter pull placed at the center looks like an afterthought. At 18 inches on center and 30 inches overall, this pull reads as part of the front's geometry rather than an accessory mounted on it. The back-to-back configuration makes it the right choice wherever both sides of the panel are finished and visible, whether that is a pass-through, a room divider, or a cabinet island accessible from two directions. Each face is through-bolted to its matching half, so both sides present the same profile in the same finish.
The pull is cast in aluminum and die-cast aluminum and finished in Oil Rubbed Bronze, a dark, hand-applied-looking surface with deliberate variation across the metal. That variation is what gives the Stacked collection its Artistic design classification: the finish is not uniform, and the layered profile adds depth that a simple bar does not carry. Oil Rubbed Bronze reads warm against stained wood fronts and adds contrast against painted whites and grays. Because the finish is a surface treatment and not a plated uniform coat, the tone shifts slightly across facets, which reinforces the handcrafted quality of the collection.
This is hardware for large cabinetry installations where scale and finish both matter. Kitchen designers specifying a statement island, contractors finishing a butler's pantry with tall pantry columns, and cabinet shops building furniture-scale pieces will find the 18-inch spacing fills the role that smaller bar pulls cannot. The back-to-back format also suits commercial and hospitality joinery where a door or panel is accessed from both sides and both faces need to be finished. Within the Stacked series, companion pieces at shorter center-to-center spacings let a single project run one finish and one design language from the narrowest drawer to the widest pantry front.
Back-to-back means two matched pull halves are through-bolted to each other through the door or panel, so both faces present a finished pull. The bolt passes completely through the substrate, which means door or panel thickness needs to be considered when selecting hardware and fasteners.
The 18-inch center-to-center and 30-inch overall length are common in appliance-scale cabinetry, but this product is classified as a cabinet pull. Verify with the appliance manufacturer if a specific classification is required for your application.
Yes. Oil Rubbed Bronze is an intentionally non-uniform finish with variation across the surface. Pieces in the same series share the same finish process, but slight tonal variation from piece to piece is characteristic of the finish, not a defect.
This SKU is the back-to-back configuration. If you need a single-sided pull in the Stacked series at a different spacing, check the companion SKUs in the collection for a single-mount version.
At 30 inches overall and 18 inches on center, this Du Verre Stacked pull in Oil Rubbed Bronze is the right choice when the front is large enough to demand hardware that matches it, and when both sides of the panel need to be finished.
Sold In: 2 Each