Schaub Sabre edge pull is a matte black cabinet pull designed to mount on the edge, so it provides a low-profile grip that keeps modern cabinet faces visually clean. The 3 inch center-to-center drilling places mounting holes at a common spacing, which supports straightforward layout on doors and drawers using standard jigs or drilling patterns. The 4-1/4 inch overall length extends gripping area beyond the screw spread, giving fingers more contact area during normal cabinet use. The matte black finish keeps reflections down, which helps the pull sit quietly against wood grains or painted finishes in working kitchens or shop-built casework. The edge pull format works well where a traditional projecting handle is not desired, so installers can meet design goals while still providing a defined pull point.
The threaded interface on this Schaub Sabre edge pull is sized for a #8 x 5/8 inch flat head sheet metal screw, so installers can plan drilling and pilot sizes around that specification. Using a flat head screw allows the head to sit flush in its countersink, which helps the pull sit tight to the mounting surface and keeps edges from catching during use. The 3 inch center-to-center drilling dimension supports use of existing 3 inch layouts, which is useful on cabinet refacing jobs where holes already exist. With a 4-1/4 inch overall length, the pull spans slightly beyond the mounting points, which helps bridge narrow frame widths while still concentrating load at the screw locations.
This edge pull from Schaub and Company sits within decorative handles and pulls, so it is suited to visible cabinet doors and drawers in kitchens, baths, and built-ins where hardware appearance carries weight alongside function. The matte black finish provides a contemporary look that coordinates with other dark fixtures, which helps unify hardware themes across a room. The 4-1/4 inch overall length places the grip in proportion to many residential door and drawer widths, keeping the pull visually balanced on typical cabinet fronts. Because the design is an edge pull, it works well on slab fronts or clean-lined facades where projecting hardware might interrupt the design. The 3 inch center-to-center measurement keeps it aligned with one of the most common cabinet drilling standards, which benefits both new installations and upgrades that rely on that spacing.
The 3 inch center-to-center drilling on the Sabre edge pull allows installers to repeat hole patterns accurately with standard templates, which helps maintain straight, level hardware lines across multiple cabinets. The 4-1/4 inch length gives each pull enough presence to feel substantial in hand, which can improve day-to-day cabinet operation for end users opening heavier doors. The matte black finish offers a consistent surface tone across pulls, which supports uniform appearance when many pieces are installed in the same kitchen or commercial casework line. Using a #8 x 5/8 inch flat head sheet metal screw specification helps installers select pilot drills and driving tools that match the hardware, which supports secure fastening into typical cabinet materials. Together, these defined dimensions and fastener details let cabinet shops and field installers plan drilling, layout, and installation steps in advance to keep workflow predictable.
The Schaub Sabre edge pull has a 3 inch center-to-center dimension, which aligns hole spacing and simplifies layout when drilling cabinet doors and drawers on jigs.
The edge pull measures 4-1/4 inches in overall length, which extends the gripping area past the mounting holes for comfortable everyday cabinet use.
This Sabre edge pull is finished in matte black, which offers a subdued, modern look that pairs well with many cabinet colors and decorative hardware themes.
The pull is specified for a #8 x 5/8 inch flat head sheet metal screw, which allows flush seating in the countersink and secure attachment to typical cabinet materials.
This pull is manufactured by Schaub and Company, placing it within their decorative handles and pulls line for cabinet and casework projects.
The edge pull design positions the grip along the cabinet edge, which keeps door and drawer faces cleaner while still providing a defined place to pull.
The Schaub Sabre edge pull in matte black combines a 3 inch center-to-center drilling, a 4-1/4 inch overall length, and a #8 x 5/8 inch flat head screw specification, giving cabinet shops and installers clear parameters for layout and fastening. Those defined dimensions support consistent placement across multiple fronts, while the edge pull format and dark finish align with clean, modern cabinet designs. For projects needing a streamlined grip that still works with common drilling patterns, this Sabre edge pull offers a focused option for new builds or updates.