Schaub Sabre Edge Pull 4 CC Matte Black defines the hardware as an edge pull, so it mounts at the door or drawer edge to give a low-profile gripping surface that suits tight cabinetry layouts and modern faces. The 4 inch center-to-center drilling dimension sets a consistent hole pattern, which supports straight-line layouts across multiple cabinet fronts. The overall 5-1/4 inch length provides extended finger contact beyond the fastener span, which helps users get a confident pull on heavier drawers or wider doors. The matte black finish establishes a dark, non-reflective surface, which visually anchors light-colored fronts and helps minor fingerprints blend into the finish during regular use. Identification as Schaub and Company hardware signals a coordinated look when used alongside other Schaub handles and pulls from the same job.
The 4 inch center-to-center drilling on this Schaub Sabre edge pull sets the mounting holes along the edge, which helps installers transfer that same measurement from piece to piece using simple jigs. The specified 5-1/4 inch length defines how much of the door or drawer edge will be spanned, which aids in visual planning when balancing the pull against panel width or stile size. The thread and screw size of #8 x 5/8 inch flat head sheet metal screw establishes the fastener interface for this pull, which supports a firm mechanical connection into the cabinet material. The matte black finish description confirms the surface appearance at the contact area, which matters when coordinating with hinges or other dark decorative hardware.
The Edge Pull, Matte Black, 4 inch Center-to-Center, 5-1/4 inch Length format positions this part for use on cabinet doors and drawers where an edge-mounted grip is preferred over a projecting handle. The defined 4 inch center-to-center measurement fits layouts designed around that common drilling span, which helps keep lines consistent when aligning hardware across base and wall cabinets. As a member of the Handles and Pulls, Schaub product class, this pull slots naturally into decorative hardware and moldings packages on casework, vanities, and built-ins. The matte black finish aligns with design programs that call for dark, continuous hardware lines, so it works well against painted fronts or lighter laminates where contrast is part of the plan.
The 4 inch center-to-center drilling dimension on the Schaub Sabre edge pull directly supports repeatable mounting, because installers can standardize a single jig or drilling guide across every cabinet front using that fixed span. The stated 5-1/4 inch overall length helps with proportion decisions, since it shows how far the pull will run along the edge relative to smaller or larger fronts. The identified #8 x 5/8 inch flat head sheet metal screw size defines both the shank diameter and length engaging the material, which matters when anchoring into typical cabinet substrates without over-penetration. Positioning this hardware in the Decorative Hardware & Moldings | Handles and Pulls category clarifies its role as a visible operating pull, which aids in planning hardware counts and placements for a full cabinet run.
The Schaub Sabre Edge Pull 4 CC Matte Black uses a 4 inch center-to-center drilling, so hole spacing follows that dimension for consistent cabinet layouts.
The Schaub 10011-MB edge pull has a 5-1/4 inch overall length, giving extra gripping surface beyond the 4 inch mounting span along the cabinet edge.
This Sabre edge pull has a matte black finish, providing a dark, non-reflective look that pairs well with modern cabinet styles and contrasting fronts.
The Edge Pull, Matte Black, 4 inch Center-to-Center is specified with a #8 x 5/8 inch flat head sheet metal screw, establishing the fastener size and type.
This product is listed under Decorative Hardware & Moldings in the Handles and Pulls, Schaub class, so it serves as visible operating hardware.
The edge pull is from Schaub and Company with manufacturer part number 10011-MB, which identifies it within the Schaub hardware family.
The Schaub Sabre Edge Pull 4 CC Matte Black pairs a defined 4 inch center-to-center drilling with a 5-1/4 inch length, which supports clean, repeatable layouts across cabinet doors and drawers. The matte black finish and Schaub and Company branding position it within decorative hardware and moldings programs where a consistent style is required. For projects that call for edge-mounted operation using a #8 x 5/8 inch flat head sheet metal screw interface, this pull supplies the specific dimensions and finish needed to plan and execute straightforward cabinet hardware runs.