Schaub Sabre edge pull is a decorative handle designed to mount on the edge of a cabinet or drawer front, giving a streamlined grip point along the top or side. The polished nickel finish provides a bright, reflective surface that suits contemporary and transitional millwork where consistent metal tone matters across a run of fronts. With a 4 inch center-to-center dimension, this pull aligns with standard drilling layouts used on many cabinet and drawer faces, which supports repeatable installations across banks of doors. The overall 5-1/4 inch length gives extra hand contact beyond the hole spacing, which helps when opening wider or heavier fronts in daily use. Schaub and Company branding identifies this pull as part of a decorative hardware line intended for visible applications, so it can be used where the hardware serves both a functional and design role on finished cabinetry.
This edge pull uses a 4 inch center-to-center spacing, so the mounting holes sit 4 inches apart along the edge where the pull is positioned. That fixed spacing ties directly into common drilling patterns used in cabinet shops, helping installations line up when multiple pulls are set along a bank of drawers. The pull length of 5-1/4 inches means the ends extend past the mounting points, which provides visual balance on doors that are wider than the hole spread. The stated thread and screw size of #8 x 5/8 inch flat head sheet metal screw defines the fastener interface at each mounting point, which allows planning for material thickness and pilot hole sizing during fabrication.
The Schaub Sabre edge pull in polished nickel fits cabinet and drawer fronts where an edge-mounted grip is preferred over a protruding handle. Because the pull is classified under handles and pulls in decorative hardware and moldings, it is intended for exposed locations on finished casework such as kitchens, baths, built-ins, and furniture-style pieces. The polished nickel surface supports use in projects where a bright, neutral metal tone coordinates with other polished nickel decorative elements, from faucets to lighting, so the pull can visually tie hardware components together. With a 4 inch center-to-center dimension, this pull suits layouts that repeat a consistent hole spread across multiple fronts, which is common in manufactured cabinetry and custom shop runs. The overall 5-1/4 inch length lets the pull visually anchor medium-width drawer fronts, helping the hardware look proportionate instead of undersized on common cabinet modules.
The defined 4 inch center-to-center spacing on this pull allows installers to rely on one drilling setup, which reduces layout variation from front to front in a bank of cabinets. That fixed spacing aligns well with templates designed around 4 inch hardware, supporting efficient shop production. The specified #8 x 5/8 inch flat head sheet metal screw interface gives a clear fastener standard for each mounting point, which helps match screw length to typical door and drawer material thicknesses used in cabinetry. The 5-1/4 inch overall length provides a predictable end-to-end dimension, which matters when aligning multiple pulls along the top edges of adjacent drawers so sightlines remain straight. The polished nickel finish is consistent across each pull, supporting uniform appearance when many pulls are installed in the same room. Schaub and Company branding ties this component into a decorative hardware program, which helps maintain a coherent look when coordinating pulls across different cabinet sizes within a project.
The Schaub Sabre edge pull has a 4 inch center-to-center dimension, which sets the distance between mounting holes and supports consistent drilling setups on cabinet and drawer fronts.
The edge pull measures 5-1/4 inches in overall length, so it extends beyond the 4 inch hole spacing and provides a broader grip area on the front edge.
The 10011-PN edge pull uses a polished nickel finish, giving a bright metallic appearance that coordinates with other polished nickel decorative hardware on cabinetry.
The edge pull is specified with a #8 x 5/8 inch flat head sheet metal screw, so the mounting interface is sized for that fastener standard at each hole.
The Schaub Sabre edge pull 4 inch CC is produced by Schaub and Company, which positions it as decorative hardware for visible cabinet and drawer applications.
The manufacturer part number for this polished nickel edge pull is 10011-PN, which identifies the specific size and finish when ordering for projects.
The Schaub Sabre edge pull, with its 4 inch center-to-center spacing and 5-1/4 inch overall length, offers a defined hardware option for cabinet and drawer fronts that use polished nickel finishes. The polished nickel surface supports projects where a unified metal tone runs across pulls, hinges, and other decorative hardware elements. With a specified #8 x 5/8 inch flat head sheet metal screw interface at each mounting point, this pull fits workflows that rely on known fastener standards. For work that calls for an edge-mounted handle from Schaub and Company, this 10011-PN model provides a clearly defined size, finish, and mounting layout for repeatable cabinet installations.