Schaub Sabre edge pull 5 CC defines this pull as a 5 inch center-to-center handle, so hole spacing lines up predictably across a run of doors or drawers. The overall 6-1/4 inch length gives a bit of extra grip beyond the screw centers, which helps when opening heavier fronts or wider drawer faces. As an edge pull, it is designed to register along the edge of a front, creating a streamlined way to grasp the cabinet without a projecting traditional handle silhouette. The brushed nickel finish brings a muted metallic look, which helps this pull sit quietly against many modern door and drawer finishes. The manufacturer part number 10012-BN ties this specific finish and size together, which supports consistent matching when ordering multiples for a full project or future additions.
This edge pull is specified with a 5 inch center-to-center dimension, which sets the exact distance between mounting points and guides drilling or boring operations. The web description lists a #8 x 5/8 inch flat head sheet metal screw as the thread and screw size, which defines the fastener shank diameter, screw style, and length expected at each mounting point. Using a #8 diameter screw means the mounting holes will be sized for that thread, which affects how tightly the pull seats against the cabinet surface. The 5/8 inch length specification indicates how far the fastener extends into the substrate, which matters when working with typical cabinet door or drawer front thicknesses so the screw remains within the material.
The classification as a handle and pull places this Schaub Sabre edge pull in the decorative hardware role for cabinets and similar casework. The 5 inch center-to-center measurement suits layouts where a medium-length pull is preferred, fitting comfortably on standard-sized doors and drawers without overpowering the front. Because it is an edge pull, it works along the edge of doors or drawer fronts, giving a linear gripping point that follows the cabinet line. The brushed nickel finish supports use in projects calling for a modern or transitional metal tone, tying into brushed nickel hinges or other decorative hardware elements on the same installation. The overall 6-1/4 inch length helps it sit proportionally on wider faces, offering balanced spacing from mounting screws to the ends of the pull.
The clearly stated 5 inch center-to-center spacing makes it straightforward to repeat this pull across multiple fronts, because installers can work from a consistent drilling jig for the entire job. The 6-1/4 inch overall length gives a fixed outer dimension, which matters when aligning pulls relative to panel edges or between adjacent cabinet fronts. The identified thread and screw size of #8 x 5/8 inch flat head sheet metal screw defines the mounting interface, which helps match drill sizes and countersinks so the head seats flush against the pull. The manufacturer part number 10012-BN tightly defines this specific brushed nickel version, which supports accurate reordering when matching existing hardware on a service visit or later expansion. The combination of edge pull style, defined center spacing, and named finish lets installers plan layouts that can be replicated or replaced with the same part over time.
The Schaub Sabre edge pull 5 CC has a 5 inch center-to-center spacing, which sets the distance between mounting points for consistent drilling and alignment across multiple fronts.
The edge pull has a 6-1/4 inch overall length, which offers extra gripping surface beyond the screw centers and helps it look proportionate on standard cabinet doors or drawers.
The product is a brushed nickel edge pull, which provides a muted metallic appearance that coordinates with other brushed nickel decorative hardware and fittings on the same project.
The web description specifies a #8 x 5/8 inch flat head sheet metal screw, which defines the screw diameter, head style, and length expected for mounting into the cabinet material.
The edge pull configuration lets the handle sit along the cabinet edge, creating a linear gripping point that keeps the front surface visually clean while still offering a reliable handhold.
Using the Schaub and Company part number 10012-BN and the 5 inch center-to-center specification helps source the same brushed nickel edge pull for later matching installations.
The Schaub Sabre edge pull 5 CC combines a 5 inch center-to-center layout with a 6-1/4 inch length and brushed nickel finish, giving a clearly defined handle for cabinet work. At Wurth Baer Supply, this 10012-BN pull fits projects calling for an edge-mounted grip in a brushed nickel tone, with center spacing and screw details already specified. Selecting this part by its exact dimensions, finish, and manufacturer number supports consistent results across new installations and follow-up work.