Schaub Sabre Edge Pull 5 CC is an edge-mount pull designed to give a low-profile handhold along a door or drawer edge. The 5 inch center-to-center dimension positions mounting points at a familiar cabinet spacing, which helps align this pull with standard drilling patterns on many shop layouts. The 6-1/4 inch overall length creates a longer gripping surface than the fixing span alone, which gives fingers more leverage when opening heavier fronts. The unlacquered brass material arrives without a protective coating, so the surface can age naturally over time, which suits projects calling for a living finish that reflects handling and environment. This pull sits within the handles and pulls class in decorative hardware, so it serves as a visible touchpoint on finished cabinetry where material and proportion directly affect the look of the run.
This edge pull uses the 5 inch center-to-center measurement as the critical drilling reference, which guides where to position two mounting holes along the edge run. The 6-1/4 inch overall length means the grip extends past these points, which helps align the body visually relative to the door or drawer height. The specified #8 x 5/8 inch flat head sheet metal screw fits the pull's countersunk holes, which lets the screw head sit flush so fingers meet a smooth edge during use. This combination of fixed spacing and defined screw size supports repeatable installation steps when fitting the same pull across a bank of cabinets.
This edge pull is part of the Schaub and Company handles and pulls product class, which places it in decorative cabinet hardware applications where the pull is both functional and visible. The 6-1/4 inch length gives the pull enough body to run along the edge of doors or drawers on casework, which matters when aligning multiple pulls across tall pantry fronts or wide drawer banks. Because the center-to-center dimension is exactly 5 inches, this pull suits layouts already organized around that drilling span, which simplifies using it in coordinated runs on face-frame or frameless cabinetry that share that spacing. The unlacquered brass finish works in designs where the goal is to let the brass surface reflect use over time, which can help visually tie together frequently handled fronts on kitchens, bars, or built-ins.
The stated 5 inch center-to-center drilling distance provides a single reference line for jigs or templates, which supports quick layout when repeating the same pull location on several cabinet fronts in a project. The 6-1/4 inch overall length defines the visible footprint of the hardware, which helps plan clearances at corners or between adjacent fronts so the pull edge aligns consistently along the run. Using the specified #8 x 5/8 inch flat head sheet metal screw allows the pull to seat tightly against the mounting edge, which helps maintain a solid feel under hand during operation. The unlacquered brass material responds to contact and environment by changing surface character, which means pulls fitted at the same time will age together, supporting a unified look along long cabinet elevations.
The Schaub Sabre Edge Pull has a 5 inch center-to-center dimension, which sets the spacing between mounting points and guides drilling locations during cabinet installation work.
The edge pull has a 6-1/4 inch overall length, which provides a longer gripping surface along the cabinet edge while still aligning with the 5 inch mounting span.
This pull is made in unlacquered brass, so the bare brass surface can develop patina from handling and exposure to suit projects that favor a living finish.
The edge pull is specified with a #8 x 5/8 inch flat head sheet metal screw, which matches its countersunk holes for a flush-mounted fastener head.
This product sits in the Schaub handles and pulls class, so it functions as both a working grip and a visible decorative element on cabinetry.
This edge pull is identified as Schaub and Company part 10012-UNBR, which ties directly to the unlacquered brass, 5 inch center-to-center design.
The Schaub Sabre Edge Pull 5 CC pairs a 5 inch center-to-center drilling span with a 6-1/4 inch overall length in unlacquered brass, giving cabinet runs a defined layout point and a grip that can develop patina. For projects built around decorative handles and pulls, this part 10012-UNBR offers a consistent mounting reference and a material choice that reads clearly on finished fronts. For the next cabinet job needing a brass edge pull with known dimensions and screw specification, this model from Wurth Baer Supply is a direct, measurable option.